Parting out aftermarket parts.
-Pro 5.0 shifter, silver mba round **** w/ bird, cut 1 inch: $100 + stock w/****.
-Hurst line lock: $100.
-Polished Slp 2otl catback w/ bullet resonator. This exhaust was custom built by mufflex by making it with 2 tips on the right also with a cutout similar to the borla exhaust: $250 + stock ws6 catback.
-Red harlan shift light: SOLD to TransAmGT.
-Eibach pro kit springs: $125.
-Bmr front swaybar: $100.
-Front swaybar polyurethane mounts: $10.
-Bad Z billet rod ended panhard and lca. All the ends need to be replaced: $100 + stock panhard.
-Custom aluminum radio bezel- For single din: $40.
-Boyd coddington smoothie II's 18x9.5 and 18x10.5 with Nitto Nt555 extreme tires. The rims need polishing and have some nicks here and there. 2 of the wheels were curbed then were lightly repaired. One of the tires' sidewall is cut up soewhat from the car being lowered. About 15,000 miles on the set: $900 + stock ws6 wheels w/tires.
Pics available upon request. Email me at zspeed3@sbcglobal.net for an questions.
-Hurst line lock: $100.
-Polished Slp 2otl catback w/ bullet resonator. This exhaust was custom built by mufflex by making it with 2 tips on the right also with a cutout similar to the borla exhaust: $250 + stock ws6 catback.
-Red harlan shift light: SOLD to TransAmGT.
-Eibach pro kit springs: $125.
-Bmr front swaybar: $100.
-Front swaybar polyurethane mounts: $10.
-Bad Z billet rod ended panhard and lca. All the ends need to be replaced: $100 + stock panhard.
-Custom aluminum radio bezel- For single din: $40.
-Boyd coddington smoothie II's 18x9.5 and 18x10.5 with Nitto Nt555 extreme tires. The rims need polishing and have some nicks here and there. 2 of the wheels were curbed then were lightly repaired. One of the tires' sidewall is cut up soewhat from the car being lowered. About 15,000 miles on the set: $900 + stock ws6 wheels w/tires.
Pics available upon request. Email me at zspeed3@sbcglobal.net for an questions.
Last edited by Zoran; Nov 24, 2005 at 07:12 PM. Reason: item sold

