**Revised List** Longblock, N2O Parts
The other threads were too long and a lot of thing have sold so I'm going to repost what's left.
-Dynotune add a dry kit: includes controller, noid, and nozzle (50-75jets)
130.00 SOLD
- TNT purge kit- doesn't include vent tube
80.00
- NX switch panel 15896, goes in the TCS switch plate- never used
40.00
- stock 02 ls1 long block, pulled out of my car 46k miles, never had any problems no smoke or oil burning
1100.00
- I also have about any stock suspension part you need from kmember to 10 bolt
All prices do not include shipping. If you pay via paypal please include 3% fee. Thanks.





-Dynotune add a dry kit: includes controller, noid, and nozzle (50-75jets)
130.00 SOLD
- TNT purge kit- doesn't include vent tube
80.00
- NX switch panel 15896, goes in the TCS switch plate- never used
40.00
- stock 02 ls1 long block, pulled out of my car 46k miles, never had any problems no smoke or oil burning
1100.00
- I also have about any stock suspension part you need from kmember to 10 bolt
All prices do not include shipping. If you pay via paypal please include 3% fee. Thanks.





Last edited by Firechikn; Mar 8, 2007 at 11:32 AM.
located in Hilliard FL 32046, north of Jacksonville.
Pics added, the pic of the whole old kit ( sold ) shows the complete dry kit, It is the
" add a dry kit " that dynotune sells
Thanks.
Pics added, the pic of the whole old kit ( sold ) shows the complete dry kit, It is the
" add a dry kit " that dynotune sells
Thanks.
Trending Topics
Do you still have the dynotune "add a dry" kit for sale? How many bottles through it and condition of kit? Controller work good yet?
Does it come with any lines, y fittings, or anything like that?
Instructions?
Does it come with any lines, y fittings, or anything like that?
Instructions?
Originally Posted by 97rs4life
Do you still have the dynotune "add a dry" kit for sale? How many bottles through it and condition of kit? Controller work good yet?
Does it come with any lines, y fittings, or anything like that?
Instructions?
Does it come with any lines, y fittings, or anything like that?
Instructions?
I have the complete kit and instructions. This was my 2nd stage and saw very little action. I probably only used it 5 times ( stock engine ). I think the kit comes with a T fitting to connect to your feed line, mounting braket for the solenoid, 2 1-1.5' lines from feed to noid - noid to nozzle, nozzle, and the 2 stage controller. I didn't use all the parts of the kit like the T fitting and mount. The controller works flawless. I used the tps to activate, never had a problem. Easy to use. Thanks.
Originally Posted by a98ws6
Has the long block seen nitrous? If so, how much?
Yes. I had a TNT F1 kit and the dry kit on the car. Only used the 2nd stage a few times. The wet kit had 150 jets, and I probably used 8 bottles or so. Never had any trouble, no smoke, knock, or even a burnt plug. I did have a complete fuel system upgrade on the car, so lean was not an option. Thanks.

