MT E/T DR's, BMR TA, Bottle opener + stock stuff
Thread Starter
10 Second Club
iTrader: (12)
Joined: Nov 2001
Posts: 2,356
Likes: 2
From: Padded cell
MT E/T DR's(REDUCED), Bottle opener + stock stuff Ok.... reduced the asking price on the tires.... they need to go.
Have a pair of virtually new 325-50-15(equivalant to a 28-13.50-15) ET drag radials FS. They were on the car for one pass, two burnouts and ~50 street miles.
They were purchased four weeks ago are in nearly as new condition and do hook(snapped my DS in half
). Reason they're for sale is I'm going to an ET Drag.
SIZE: P325/50R15
COMPOUND: R2
TREAD WIDTH: 11
OVERALL WIDTH: 13.0
DIAMETER: 28.0
CIRCUMFERENCE: 87
EQUIVALENT SIZE: 28x13.50R15
See them here > http://www.mickeythompsontires.com/strip.html
Paid $363.99 + shipping for the pair($422.00 total).
Need $250.00/pair + shipping from 30045(Atlanta).
Also have a pair of P295-50-15" Futura(made by Cooper Tire)street radial tires. They have only approx. 200 street miles and are in perfect condition. They're a good winter/off season street tire, and wear well.
$100.00/pair + shipping.
BMR non adjustable Torque Arm(-2* pinion angle built in). Was on the car for approximately 5k miles. This is the arm w/the SINGLE bolt holes (vs. the dbl. holes for multiple applications). Will work w/tailshaft mount or chassis mount. All hardware included(clamshell/poly bushing).
See here: http://www.thunderracing.com/catalog...&vid=3&pcid=89
Upper and lower mounting bracket plate bolt holes are just a tad bit elongated due to the mounting bolts working loose in my Moser 12 bolt, but is an easy/cheap fix by anyone w/a welder.
Paid $219.99 + shipping new.
Need $75.00 + shipping. SOLD
Lunati titanium retainers.
Fits 1.25" springs
Excellent condition.
$75.00 shipped
DynoTune remote bottle opener.
Excellent condition.
See here:
http://www.dynotunenitrous.com/store...?idcategory=33
$100.00 + shipping.
NX switch panel. See here: http://byunspeed.com/product_info.ph...d738cbd5ed0493
Excellent condition. $25.00 + shipping. SALE PENDING
New Cloyes timing chain w/gears.
Excellent condition.
$35.00 + shipping. SOLD
Stock '00 LS1 pistons/rods assembled. 55k miles.
Excellent condition. $100.00 + shipping.
Stock '02 LS1 rockers/pedestals. 5k miles.
Excellent condition. $100.00 + shipping. SOLD
Stock '02 LS1 lifters. 5k miles.
Excellent condition. $100.00 + shipping.
Stock '02 LS1 oil pump. 5k miles.
Excellent condition(40 psi @ idle/55 psi under throttle)
$75.00 + shipping.
Stock '02 7.40" push rods. 5k miles.
Excellent condition.
$30.00 + shipping.
Stock '02 LS1 cam. 5k miles.
Excellent condition.
$25.00 + shipping.
Stock '00 LS1 WS6 lugnuts/caps
Excellent condition.
$20.00 + shipping.
Stock '02 crank pully(automatic)
Excellent condition.
$15.00 + shipping
Stock '00 crank pully(manual)
Excellent condition.
$15.00 + shipping
Have a pair of virtually new 325-50-15(equivalant to a 28-13.50-15) ET drag radials FS. They were on the car for one pass, two burnouts and ~50 street miles.
They were purchased four weeks ago are in nearly as new condition and do hook(snapped my DS in half
). Reason they're for sale is I'm going to an ET Drag.SIZE: P325/50R15
COMPOUND: R2
TREAD WIDTH: 11
OVERALL WIDTH: 13.0
DIAMETER: 28.0
CIRCUMFERENCE: 87
EQUIVALENT SIZE: 28x13.50R15
See them here > http://www.mickeythompsontires.com/strip.html
Paid $363.99 + shipping for the pair($422.00 total).
Need $250.00/pair + shipping from 30045(Atlanta).
Also have a pair of P295-50-15" Futura(made by Cooper Tire)street radial tires. They have only approx. 200 street miles and are in perfect condition. They're a good winter/off season street tire, and wear well.
$100.00/pair + shipping.
BMR non adjustable Torque Arm(-2* pinion angle built in). Was on the car for approximately 5k miles. This is the arm w/the SINGLE bolt holes (vs. the dbl. holes for multiple applications). Will work w/tailshaft mount or chassis mount. All hardware included(clamshell/poly bushing).
See here: http://www.thunderracing.com/catalog...&vid=3&pcid=89
Upper and lower mounting bracket plate bolt holes are just a tad bit elongated due to the mounting bolts working loose in my Moser 12 bolt, but is an easy/cheap fix by anyone w/a welder.
Paid $219.99 + shipping new.
Need $75.00 + shipping. SOLD
Lunati titanium retainers.
Fits 1.25" springs
Excellent condition.
$75.00 shipped
DynoTune remote bottle opener.
Excellent condition.
See here:
http://www.dynotunenitrous.com/store...?idcategory=33
$100.00 + shipping.
NX switch panel. See here: http://byunspeed.com/product_info.ph...d738cbd5ed0493
Excellent condition. $25.00 + shipping. SALE PENDING
New Cloyes timing chain w/gears.
Excellent condition.
$35.00 + shipping. SOLD
Stock '00 LS1 pistons/rods assembled. 55k miles.
Excellent condition. $100.00 + shipping.
Stock '02 LS1 rockers/pedestals. 5k miles.
Excellent condition. $100.00 + shipping. SOLD
Stock '02 LS1 lifters. 5k miles.
Excellent condition. $100.00 + shipping.
Stock '02 LS1 oil pump. 5k miles.
Excellent condition(40 psi @ idle/55 psi under throttle)
$75.00 + shipping.
Stock '02 7.40" push rods. 5k miles.
Excellent condition.
$30.00 + shipping.
Stock '02 LS1 cam. 5k miles.
Excellent condition.
$25.00 + shipping.
Stock '00 LS1 WS6 lugnuts/caps
Excellent condition.
$20.00 + shipping.
Stock '02 crank pully(automatic)
Excellent condition.
$15.00 + shipping
Stock '00 crank pully(manual)
Excellent condition.
$15.00 + shipping
Last edited by LowETz; Nov 18, 2005 at 07:31 AM.
Originally Posted by LowETz
BMR non adjustable Torque Arm(-2* pinion angle built in). Was on the car for approximately 5k miles. This is the arm w/the SINGLE bolt holes (vs. the dbl. holes for multiple applications). Will work w/tailshaft mount or chassis mount. All hardware included(clamshell/poly bushing).
Upper and lower mounting bracket plate bolt holes are just a tad bit elongated due to the mounting bolts working loose in my Moser 12 bolt, but is an easy/cheap fix by anyone w/a welder.
Need $75.00 + shipping.
Upper and lower mounting bracket plate bolt holes are just a tad bit elongated due to the mounting bolts working loose in my Moser 12 bolt, but is an easy/cheap fix by anyone w/a welder.
Need $75.00 + shipping.
whats your paypal?
thanks
Brian
