Set of BMR Tubular LCA's with poly bushings. Black, non adjustible. Great condition. SOLD. I'll post pics of them tonight.

http://www.force-fed-fabrications.co...2/P1010119.JPG
http://www.force-fed-fabrications.co...2/P1010120.JPG
http://www.force-fed-fabrications.co...2/P1010121.JPG

Pair of stock TA 5 spoke wheels 16" with roadhuggers 245s. Wheels in good condition, tires have 60% life left. Asking $50.00. Pics:

http://www.force-fed-fabrications.co...e/DSC01261.JPG
http://www.force-fed-fabrications.co...e/DSC01262.JPG
http://www.force-fed-fabrications.co...e/DSC01263.JPG
http://www.force-fed-fabrications.co...e/DSC01264.JPG
http://www.force-fed-fabrications.co...e/DSC01265.JPG
http://www.force-fed-fabrications.co...e/DSC01266.JPG
http://www.force-fed-fabrications.co...e/DSC01267.JPG

LS1 block, with one cracked sleeve, otherwise ok. Have mains. I have two of these blocks with cracked sleeves, make a table or something. $75 each with mains, OBO. Pics:

http://www.force-fed-fabrications.co...2/P1010069.JPG
http://www.force-fed-fabrications.co...2/P1010072.JPG
http://www.force-fed-fabrications.co...2/P1010073.JPG
http://www.force-fed-fabrications.co...2/P1010074.JPG
http://www.force-fed-fabrications.co...2/P1010076.JPG

98+ center console for A4. Black. Decent condition. everythign works, no broken hinges, even the cupholder still works good. $75.00.

http://www.force-fed-fabrications.co...2/P1010077.JPG
http://www.force-fed-fabrications.co...2/P1010078.JPG
http://www.force-fed-fabrications.co...2/P1010079.JPG


Unknown fbody muffler, $10 Pics:

http://www.force-fed-fabrications.co...2/P1010080.JPG

Thunder Racing TR224 cam, 224/224/114 LSA 0.567"/0.567" lift. Less then 500 miles on it. Perfect. AskingSOLD!. Pics:

http://www.force-fed-fabrications.co...2/P1010084.JPG
http://www.force-fed-fabrications.co...2/P1010086.JPG

Stock 99 LS1 Cam. 50k miles. $25.00.

http://www.force-fed-fabrications.co...2/P1010087.JPG

Comp Cams stock length pushrods, less then 500 miles of use. $75.00.

http://www.force-fed-fabrications.co...2/P1010088.JPG
http://www.force-fed-fabrications.co...2/P1010089.JPG

ARP 12pt head studs for up to 03 LSX motors $175. Pics:

http://www.force-fed-fabrications.co...2/P1010101.JPG

ARP 12pt main studs for LSX motors. SOLD! Pics:

http://www.force-fed-fabrications.co...2/P1010102.JPG

LS6 oil pump. ported by thunderracing. SOLD! . Less then 500 miles of use.

http://www.force-fed-fabrications.co...2/P1010103.JPG
http://www.force-fed-fabrications.co...2/P1010104.JPG

AFR 225 Heads. 72CC chambers. Stainless valves, just been replaced 14 out of 16 valves, I just got the heads back from AFR for warranty work. Upgraded valve springs, titanium retainers and locks. Under 500 miles of use. $2200.00 No waiting. Pics:

http://www.force-fed-fabrications.co...2/P1010091.JPG
http://www.force-fed-fabrications.co...2/P1010093.JPG
http://www.force-fed-fabrications.co...2/P1010094.JPG
http://www.force-fed-fabrications.co...2/P1010095.JPG
http://www.force-fed-fabrications.co...2/P1010096.JPG
http://www.force-fed-fabrications.co...2/P1010097.JPG
http://www.force-fed-fabrications.co...2/P1010098.JPG
http://www.force-fed-fabrications.co...2/P1010099.JPG
http://www.force-fed-fabrications.co...2/P1010100.JPG

Forged 346 rotating assembly. Stock crank, Eagle forged H beam rods and Diamond -8.6 forged pistons. This assembly has been machined and balanced to work together so I rather sell together. I made 950 rwhp on this assembly and everything is in great shape. Nice find for someone to build a cheap forged short/long block Just put new bearings and rings on it and hone your block to the 3.905" bore pistons and it will be good for the same power again. Saves you money on machining shop costs. SOLD!.

http://www.force-fed-fabrications.co...2/P1010105.JPG
http://www.force-fed-fabrications.co...2/P1010106.JPG
http://www.force-fed-fabrications.co...2/P1010107.JPG
http://www.force-fed-fabrications.co...2/P1010108.JPG
http://www.force-fed-fabrications.co...2/P1010109.JPG
http://www.force-fed-fabrications.co...2/P1010110.JPG
http://www.force-fed-fabrications.co...2/P1010111.JPG
http://www.force-fed-fabrications.co...2/P1010112.JPG
http://www.force-fed-fabrications.co...2/P1010113.JPG
http://www.force-fed-fabrications.co...2/P1010114.JPG
http://www.force-fed-fabrications.co...2/P1010115.JPG
http://www.force-fed-fabrications.co...2/P1010116.JPG
http://www.force-fed-fabrications.co...2/P1010117.JPG
http://www.force-fed-fabrications.co...2/P1010118.JPG


Rather try to sell this stuff local since shiping SUCKS for most of it.

 

put me down for the a-arms, need pics first
yobabiesdaddy2001@yahoo.com

 

Wow, some good prices there. Too bad I'm not building a hybrid anymore, I'd grab one of those blocks. They're only down to $300 on eBay. Nice price on your wheels too. Good luck with the sale.

 

Head studs sold! Payment sent.

 

if you cant get rid of the center a4 consol, i just want the lid

 

What CR with these pistons and a stck ls6 head.

 

~9.5 CR assuming CC of 62 or so.

 

thanks!

 

pics of LCAs?

 

head studs sold.

wheels sale pending.

Pics of the LCA's will be posted tonight.

 

Sale pending on LS6 oil pump.

 

Sale pending on main studs.

pictures of LCA's have been added in the orginal post.

 

I haven't spoken to you since back in the CZ28.com days (<- Bone camaro).

Any thought to selling the pistons and rods separately? I'm interested if so and they'll work with a 4" crank

 

i know its a pita to ship the blocks but let me know total cost with shipping to 48329 if your interested. and give me your zip code so i can calculate with my account also.
thanx

 

There are no defects what so ever with the rods/pistons/crank? Are they the ls1 specific eagle rods?

 

thanks for the interest guys, but the rotating assembly has a sale pending now

Pman, my Zip is 77459 if you want to take a look at shipping costs. The bare block weighs ~100 lbs, I expect it to cost ~$150 to ship it.


thanks,
Tiago

 

hows the rest of the block? cracks in the aluminum? what kinda setup was used in the block?boost?N20?

thanx
paul

 

the rest of the block is great. It was used under boost.

 

PM Sent on Cam

 

Replied.

TTT......