QTP headers, y-pipe, 85mm Z06 MAF, LS2 cam, head bolts, K&N, misc stock parts
Thread Starter
TECH Fanatic
iTrader: (35)
Joined: Sep 2004
Posts: 1,660
Likes: 0
From: Maryland/Illinois
QTP headers, y-pipe, 85mm Z06 MAF, LS2 cam, head bolts, K&N, misc stock parts OK, going to try the turbocharged route on my car. Therefore, selling some n/a stuff. I am open to reasonable offers on this stuff, so don't hesitate to ask. I will be getting some pics of the stuff up later tonight or tomorrow. As per forum rules there are no dibs. The first guy with the money gets the parts.
Nearly brand new QTP HVMC race long tube headers, installed on the car 1.5 months ago, only ~500 miles on them, like new condition, part number 200198 - $650 SOLD
Nearly new QTP off-road y pipe with flowmaster merge collector, installed on the car 3 months ago, only 800 miles on it - $250 SOLD
Would prefer to sell the headers/y as a set. If they don't sell as a set in about a week I will split them up. At that point first guy with the money gets them.
SLP intake lid, has 2 holes drilled for dry nitrous kit but you can get a couple plastic plugs to put in them, otherwise lid is in great shape $75
Stock 2005 LS2 cam, 4k miles on it (same specs as an 01 Z06 cam) $70
2001 85mm Z06 MAF, descreened. $85 SOLD
Stock LS1 head bolts, complete set for head swap, new $50
K&N air filter for F body cars, about 3000 miles on it. $40
Stock 2000 hurst shifter $75
2 stock LS1/LS6 flywheel, good condition, will need surfaced $50 each
Stock 2000 y-pipe $50
Stock torque arm, has been repaired at rear diff bolt hole $55
Stock 26 lb injectors, work fine, ~40k miles $50
Stock lower control arms $50
Nearly brand new QTP HVMC race long tube headers, installed on the car 1.5 months ago, only ~500 miles on them, like new condition, part number 200198 - $650 SOLD
Nearly new QTP off-road y pipe with flowmaster merge collector, installed on the car 3 months ago, only 800 miles on it - $250 SOLD
Would prefer to sell the headers/y as a set. If they don't sell as a set in about a week I will split them up. At that point first guy with the money gets them.
SLP intake lid, has 2 holes drilled for dry nitrous kit but you can get a couple plastic plugs to put in them, otherwise lid is in great shape $75
Stock 2005 LS2 cam, 4k miles on it (same specs as an 01 Z06 cam) $70
2001 85mm Z06 MAF, descreened. $85 SOLD
Stock LS1 head bolts, complete set for head swap, new $50
K&N air filter for F body cars, about 3000 miles on it. $40
Stock 2000 hurst shifter $75
2 stock LS1/LS6 flywheel, good condition, will need surfaced $50 each
Stock 2000 y-pipe $50
Stock torque arm, has been repaired at rear diff bolt hole $55
Stock 26 lb injectors, work fine, ~40k miles $50
Stock lower control arms $50
Last edited by bowtieman81; Aug 8, 2006 at 08:47 AM.
Any pics of the QTP headers could you please send them to xsherm13x@netscape.net I appreciate it man.
Trending Topics
Thread Starter
TECH Fanatic
iTrader: (35)
Joined: Sep 2004
Posts: 1,660
Likes: 0
From: Maryland/Illinois
Originally Posted by mtnbkr81
Interested in the head bolts. PM me if they are still available.
I tried to sell them to you a few months ago. You change your mind as much as I do.
Hey, will that LS2 cam fit in a 1999 6.0? My buddy is doing his motor and is interested in your cam. Please send some pics.
Justin
supajut@msn.com
Justin
supajut@msn.com
