Notices

NEEDED: 99+ Coil pack harness

Thread Tools
 
Search this Thread
 
Old Aug 31, 2005 | 07:39 AM
  #1  
MrDude_1's Avatar
Thread Starter
TECH Junkie
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Feb 2002
Posts: 3,368
Likes: 5
From: Charleston, SC
Default NEEDED: 99+ Coil pack harness

i need a coil pack harness for my car.... one of the coil connectors on mine is fubard...

anyone have one?
Reply
Old Aug 31, 2005 | 10:22 AM
  #2  
LS1CMR's Avatar
TECH Enthusiast
iTrader: (12)
 
Joined: Feb 2004
Posts: 500
Likes: 0
From: Lawrenceville, GA
Default

ill sell you the complete coil set for $150 + shipping has brackets, coils, and wires
Reply
Old Aug 31, 2005 | 10:33 AM
  #3  
MrDude_1's Avatar
Thread Starter
TECH Junkie
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Feb 2002
Posts: 3,368
Likes: 5
From: Charleston, SC
Default

im looking for just the harness....

really my harness is fine except for one coil connector... if someone has one coil connector they could clip off (prefably the #6 one) then id take that too
Reply
Old Aug 31, 2005 | 10:50 AM
  #4  
LS1CMR's Avatar
TECH Enthusiast
iTrader: (12)
 
Joined: Feb 2004
Posts: 500
Likes: 0
From: Lawrenceville, GA
Default

if your just looking for the connector just go to NAPA and they sell the connectors for like $5, cheaper than paying shipping
Reply
Old Aug 31, 2005 | 12:26 PM
  #5  
MrDude_1's Avatar
Thread Starter
TECH Junkie
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Feb 2002
Posts: 3,368
Likes: 5
From: Charleston, SC
Default

Originally Posted by LS1CMR
if your just looking for the connector just go to NAPA and they sell the connectors for like $5, cheaper than paying shipping
first thing i tried... noone has the metripack connector i need.

im sure its possible to look it up and have it ordered, but the guys at the two local NAPAs were..... well, lets just call them "less then qualified to help"... heh.
Reply
Old Aug 31, 2005 | 01:11 PM
  #6  
Red Heartbeat's Avatar
TECH Apprentice
iTrader: (9)
 
Joined: Mar 2004
Posts: 343
Likes: 0
From: Denton, Texas
Default

I have one from a 98 harness if it will work. Would do $20 shipped. I know I plugged a 2002 harness into my 98 engine and it works great. Should be no problem for you.
Reply
Old Aug 31, 2005 | 01:21 PM
  #7  
MrDude_1's Avatar
Thread Starter
TECH Junkie
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Feb 2002
Posts: 3,368
Likes: 5
From: Charleston, SC
Default

i know the white connector is the same, but are the individual coil connectors the same? thats the part that i think is diffrent...
Reply
Old Aug 31, 2005 | 03:39 PM
  #8  
Red Heartbeat's Avatar
TECH Apprentice
iTrader: (9)
 
Joined: Mar 2004
Posts: 343
Likes: 0
From: Denton, Texas
Default

They have to be the same since I reused my 98 harnesses when I switched to 2002 heads and coil packs. I'll refund all but the shipping if it doesn't work.
Reply
Old Aug 31, 2005 | 03:59 PM
  #9  
MrDude_1's Avatar
Thread Starter
TECH Junkie
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Feb 2002
Posts: 3,368
Likes: 5
From: Charleston, SC
Default

Originally Posted by Red Heartbeat
They have to be the same since I reused my 98 harnesses when I switched to 2002 heads and coil packs. I'll refund all but the shipping if it doesn't work.

how diffrent is the 98 one? i know the coils are seperate... when you have it compared to the 2002 harness, are the lengths the same?
Reply
Old Aug 31, 2005 | 10:27 PM
  #10  
Red Heartbeat's Avatar
TECH Apprentice
iTrader: (9)
 
Joined: Mar 2004
Posts: 343
Likes: 0
From: Denton, Texas
Default

I just dug through my saved parts bin and found that I used 2002 coil harnesses when I did my head conversion. The coil pack connectors must be different. The main harness connector is the same.
Reply
Old Nov 10, 2005 | 02:26 PM
  #11  
MrDude_1's Avatar
Thread Starter
TECH Junkie
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Feb 2002
Posts: 3,368
Likes: 5
From: Charleston, SC
Default

TTT

i still need either the coil pack harness, or a connector that plugs into a 99-02 LS1 coil.

i dont mind if its something clipped off of the harness, as long as there are leads long enough to solder/heatshrink...


anyone??? (currently im using a friends coil packs, his car is down.. but its getting fixed soon......)
Reply
Old Nov 10, 2005 | 07:29 PM
  #12  
WS-6_2002's Avatar
TECH Apprentice
iTrader: (10)
 
Joined: Aug 2002
Posts: 331
Likes: 0
From: Mililani, Hi
Default

I might have what you are looking for. Yu need the 1 big connector that connects to all the coils? If thats it I have one.
Reply
Old Nov 11, 2005 | 07:15 AM
  #13  
MrDude_1's Avatar
Thread Starter
TECH Junkie
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Feb 2002
Posts: 3,368
Likes: 5
From: Charleston, SC
Default

Originally Posted by WS-6_2002
I might have what you are looking for. Yu need the 1 big connector that connects to all the coils? If thats it I have one.
no.
i need the connector that connects to ONE single coil. theres 4 of them on each side... its NOT the big white connector.


im not trying to be rude about it, but ive had 2 of the wrong ones sent in the mail already... lol.
Reply
Old Nov 11, 2005 | 08:32 AM
  #14  
Tom the roofer's Avatar
TECH Addict
iTrader: (9)
 
Joined: Nov 2001
Posts: 2,652
Likes: 1
From: Western Pennsylvania
Default

I have a 1999 coil pack harness set. Both sides. I repaired 1 side when a wire shorted out and burned abit. I repaired it with solder and shrink tape. Worked great. $30 plus shipping for the pair.
Reply
Old Nov 15, 2005 | 09:45 AM
  #15  
MrDude_1's Avatar
Thread Starter
TECH Junkie
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Feb 2002
Posts: 3,368
Likes: 5
From: Charleston, SC
Default

i got one from Tom the roofer.... thanks!
Reply
Old Feb 13, 2008 | 04:53 PM
  #16  
neckspeed's Avatar
Teching In
iTrader: (8)
 
Joined: Jan 2008
Posts: 32
Likes: 0
Default coil pack

need wire harness for 2002 above 6.0 liter. putting on ls1 . any help really appreciate. need l/r sides.

Last edited by neckspeed; Feb 13, 2008 at 04:59 PM.
Reply




All times are GMT -5. The time now is 07:17 PM.