Looking to buy the following:

AFR 205 LS1 heads - new or low miles - milled or unmilled - preferably
with AFR valve springs

Burst Disks for Fast90 Intake - obviously NOT burst

Nasty Performance or FAST Fuel Rails w/or w/out install kit - new or low miles

42# SVO injectors - new or low miles

Comp Std., Lunati Hyd. Roller Lifters - new or low miles

Racetronix PnP In-Tank Walbro Pump - Got One - Thanx Ross!

Katech or Thunder Racing Tensioner - new or low miles

Aftermarket HD Driveshaft - A4, New or low miles

BMR Upper Panhard Bar/Relocation Kit - Red in color

WB Setup w/Gauge - preferably Dynotune LC-1, black faced gauge

Autometer Ultra-Lite Elec. Tranny Temp Gage - New or slightly used

Autometer Ultra-Lite Elec. Fuel Pressure Gage (0-100psi) - New or slightly used

EFILive w/Flashscan

Just looking to see if anyone has these available for a good price prior to buying from a sponsor...

Email me at jay442@msn.com with any info

 

I've got a racetronix for a metal tank. Can it be made to work on a plastic tank? It's brand new

 

Don't know if they can be made to work or not, but I'd rather have the version made specifically for the plastic tank.

Thanks for the offer though

 

Added some more items to the shopping list...

 

We have tensioners in stock.
$135.00
$10.00 shipping

 

up to the top...

 

I have the ractronix pump for the 1999 and up plastic tank with the wiring harness. Very limited use on the pump and the wiring harness is still new in the bag.

$150 shipped ground to the 48 states.

Feel free to send a PM if you are interested.

Thanks,

Ross

 

Ross-
Replied to your PM...

 

Ross-

Just sent you over PayPal in the amount we agreed for the Racetronix Pum/PnP Wiring/Plastic Fuel Bucket.

Thanx for the great deal!

 

Still shopping!

 

Up to the top for Tuesday

 

Received the fuel pump/bucket today - thanks for the great deal!

 

WoW! That was a smoking deal! Nice buy

 

Yeah, you got that right! Got the Racetronix for 00-02' plastic tank cars with low miles + new PnP wiring harness & he threw in the plastic fuel bucket with the pump already installed (for free) - so now all I have to do is pop the old one out and put the new assembly in!

BTW, I did appreciate your offer - I just wanted the version for the plastic tank cars

 

Still shopping! Added some new items...

 

I have a new in box Mez elec WP, figured it would go nice with your list. PM if interested.

 

Thanx for the offer but I had already purchased a Meziere pump about a year ago - decided it was not for my combo, never used it - sold it.

Bought an Evans HD Pump with the JetHot bling coating

 

Up to the tippety-top!

 

Up up up for Friday...

 

I have a 1000 horsepower driveshaft that could be shortened 4 inches to fit your tranny. It is currently set-up for a 200r4 tranny. It was built by this heavy-duty diesel driveshaft maker near me. It has the rear 1350 forged yoke. I was wanting 250, but maybe we can work out a deal. Thanks, Brian