FLP long tube headers with ORY and cats that will go inline. Race style, no egr hook ups. They need painted. The ceramic coating is worn down.
550.00 + shipping. SOLD!

Crane dual valve springs with Ti-retainers good to .650" lift used 8K miles. 200.00 + shipping. SOLD.

Thunder chromoly pushrods same miles. 75.00 shippied. 7.4" length. SOLD.

HPM chassis mount TQ Arm has a little modification to it to fit a 9". But made for a 10 or 12 bolt rear. The arm is red and mount is black powder coated. Works good. swapped out for a sphoon T/A. 250.00 + shipping. SOLD!

NIB set of urathane motor mounts, I used the solids so I don't need these. 50.00 + shipping.

255lph inline fuel pump. With the relay and wiring, brackets to. 75.00 shipped. SOLD.



Add the 3% for paypal if using that for payment.

I can put up pics upon request. First come first serve. Thanks.

 

Bump.

 

very interested in the headers and y pipe. do u have any pics?do u have any idea what shiping would be? thanks

 

Heres pics for yeah. And If I had to guess on shipping, I would say aroud 50 to 85 bucks.

 

bump for a good seller

 

Thanks man!

 

PMs replied.

 

Robinator has first dibs on the headers.

 

I'm 2nd behind Rob. Let me know.

 

You got it!

 

pm sent for pushrods and springs

 

All PMs returned, several people wanting the springs and pushrods!

 

pm sent for the price you requested email me spacy00165536@yahoo.com Paypal ID

 

money sent Paypal for valve springs and pushrods

 

Springs and pushrods sold.

 

Bumpity bump.

 

Motor mounts and TQ arm still for sale!

 

Can you give me more info on the tq arm? Why did you swap and this should fit all 4th gens correct? Also will it still bolt up to a 10 bolt?

 

Poly motor mounts and TQ arm still left. Everything else has sold!

Inline fuel pump just added to the list.

 

I swapped it for a sphoon thats made for a 9". Its for a 4th gen. Its for a stock 10 bolt rearend or a 12 bolt.