Performance parts FS and stock & perf. parts wanted
Performance parts FS and stock & perf. parts wanted(4-23 update) Demoding a cam only Camaro that went 6.60's on 150 shot. All don't have much use. Will sell anything out right or take partial trades for my wanted list at the bottom.
- TH400 transbrake, reverse manual valve body with TCI 3800 stall, crossmember mount, deep pan, transcooler, B/M rachet shifter. 1150.00 for all
- NX mas air wet kit, heater, RPM window switch, eletronic throttle switch, all $750.00
-Hoosier QTP 28 x 11.5 x 15 (10" tread). $200.00
-M/T 28 x 11.50 x 15 ET streets (9" tread) new never mounted $250.00
-Lane's true duals with bullets. They were used with Jet Hots but cold easily be made to work with any long tubes. The hangers were the old way he used to do them. I suggest making new hangers. The through the floor ones are prone to rip out.
$350.00
-SLP Loudmouth dual/dual. Was on my other car only a couple months. Needs to be welded back together over the axle.
$200.00
-B/M Ripper shifter excellent condition 130.00
Things I need. Will buy outright or take as partial trade.
-center console and 6speed shift plate in excellent condition
-stock lid and silencer assembly for SS if it's different than Z28??
-rear seat belt anchor that welds to the floor. Either drilled through the spot welds or with sheet metal of a few inches cut around it if its out of a junk car.
-leather rear seat back in excellent condition the real dark charcoal color. I think the code is 192
-stock SS or WS6 cat back thats not all hacked up
- TH400 transbrake, reverse manual valve body with TCI 3800 stall, crossmember mount, deep pan, transcooler, B/M rachet shifter. 1150.00 for all
- NX mas air wet kit, heater, RPM window switch, eletronic throttle switch, all $750.00
-Hoosier QTP 28 x 11.5 x 15 (10" tread). $200.00
-M/T 28 x 11.50 x 15 ET streets (9" tread) new never mounted $250.00
-Lane's true duals with bullets. They were used with Jet Hots but cold easily be made to work with any long tubes. The hangers were the old way he used to do them. I suggest making new hangers. The through the floor ones are prone to rip out.
$350.00
-SLP Loudmouth dual/dual. Was on my other car only a couple months. Needs to be welded back together over the axle.
$200.00
-B/M Ripper shifter excellent condition 130.00
Things I need. Will buy outright or take as partial trade.
-center console and 6speed shift plate in excellent condition
-stock lid and silencer assembly for SS if it's different than Z28??
-rear seat belt anchor that welds to the floor. Either drilled through the spot welds or with sheet metal of a few inches cut around it if its out of a junk car.
-leather rear seat back in excellent condition the real dark charcoal color. I think the code is 192
-stock SS or WS6 cat back thats not all hacked up
Last edited by gearheads78; Apr 27, 2006 at 12:12 PM.
Originally Posted by gearheads78
Demoding a cam only Camaro that went 6.60's on 150 shot. All don't have much use. Will sell anything out right or take partial trades for my wanted list at the bottom.
- built 8.8 for F-body, Moser axles, 4.10, Hutto's 3 position relocators, TA girtle, ect. It was not hooked up in this car but all the parts seem to be there to hook up 4 chanel ABS.
Complete $1200.00 plus a pair of 4 channel backplates. You use you own callipers and rotors.
- TH400 transbrake with TCI 3800 stall, crossmember mount, deep pan, transcooler, B/M rachet shifter. 1200.00 for all
-ASP underdrive pulley and short belt 100.00
-7.4" chomoly pushrods 75.00
- LGmotorsports G2 cam with Patriot gold springs 400.00
- NX mas air wet kit, heater, RPM window switch, eletronic throttle switch, all $800.00
- clear MTI lid $60.00
-Hoosier QTP 28 x 11.5 x 15 aprox 75% tread. $200.00
Things I need. Will buy outright or take as partial trade.
-set of 4 matching 275 40-17's very close to new
-good low mile stock spring and retainers
-leather rear seat back in excellent condition the real dark charcoal color. I think the code is 192
-275-50-15 M/T drag radials or 26-12.5-15 ET steets in close to new condition
-stock hurst shifter
-6 speed trans in either perfect condition of known good core.
- clutch master and slave
-stock clutch and flywheel in excellent shape
-4 channel backplates
-stock SS or WS6 cat back thats not all hacked up
-rear O2 sensors
- built 8.8 for F-body, Moser axles, 4.10, Hutto's 3 position relocators, TA girtle, ect. It was not hooked up in this car but all the parts seem to be there to hook up 4 chanel ABS.
Complete $1200.00 plus a pair of 4 channel backplates. You use you own callipers and rotors.
- TH400 transbrake with TCI 3800 stall, crossmember mount, deep pan, transcooler, B/M rachet shifter. 1200.00 for all
-ASP underdrive pulley and short belt 100.00
-7.4" chomoly pushrods 75.00
- LGmotorsports G2 cam with Patriot gold springs 400.00
- NX mas air wet kit, heater, RPM window switch, eletronic throttle switch, all $800.00
- clear MTI lid $60.00
-Hoosier QTP 28 x 11.5 x 15 aprox 75% tread. $200.00
Things I need. Will buy outright or take as partial trade.
-set of 4 matching 275 40-17's very close to new
-good low mile stock spring and retainers
-leather rear seat back in excellent condition the real dark charcoal color. I think the code is 192
-275-50-15 M/T drag radials or 26-12.5-15 ET steets in close to new condition
-stock hurst shifter
-6 speed trans in either perfect condition of known good core.
- clutch master and slave
-stock clutch and flywheel in excellent shape
-4 channel backplates
-stock SS or WS6 cat back thats not all hacked up
-rear O2 sensors
