Stock 241 heads/cam/pushrods/timing chain/lifters FS

 
Thread Tools
 
Search this Thread
 
Old Jun 3, 2006 | 09:52 PM
  #1  
marv's Avatar
Thread Starter
TECH Enthusiast
iTrader: (40)
 
Joined: Jan 2006
Posts: 666
Likes: 0
From: Scottsboro, AL
Default Stock 241 heads/cam/pushrods/timing chain/lifters FS

Recently did a H/C swap and have some stock parts laying around that I no longer need. All parts are stock off of a 2000 LS1. Everything is in good working condition and worked perfectly when it came off the car. Not sure how many folks want this stuff, but it'd be perfect for getting a car back up and running temporarily or for a stock daily driver.

1. Stock 241 casting heads w/stock valves and valve springs. No leaks, no cracks.
Price: $150 +shipping SOLD!!!

2. Stock pushrods - perfectly straight and worked just fine.
Price: $30 +shipping

3. Stock cam - not sure of #'s, but as before, is the stock piece that came from GM.
Price: $50 +shipping

4. Stock lifters - work just fine, went with new ones when I did the cam install.
Price: $50 +shipping

Also, have EGR system and AIR system (minus pump) that I'd sell cheap (read really really cheap!!) if somebody needs it. Got someone interested.

I'm sure I've missed something, but that's all I can think of for now. Will have pics of above tomorrow. For pics, just post up, PM or email me at:

JWhiteUAH - at - Hotmail - dot - com

Prefer PayPal, but open to other methods. Will ship at buyers specified carrier. All prices + shipping.

Thanks,
Marv

Last edited by marv; Jun 12, 2006 at 09:49 AM.
Old Jun 4, 2006 | 03:48 PM
  #2  
marv's Avatar
Thread Starter
TECH Enthusiast
iTrader: (40)
 
Joined: Jan 2006
Posts: 666
Likes: 0
From: Scottsboro, AL
Default

Bump...
Old Jun 4, 2006 | 08:26 PM
  #3  
linegtdt52's Avatar
12 Second Club
iTrader: (12)
 
Joined: Aug 2004
Posts: 402
Likes: 0
From: Dallas, TX
Default

where are you located
at?
Old Jun 5, 2006 | 10:07 PM
  #4  
marv's Avatar
Thread Starter
TECH Enthusiast
iTrader: (40)
 
Joined: Jan 2006
Posts: 666
Likes: 0
From: Scottsboro, AL
Default

Originally Posted by linegtdt52
where are you located
at?
Sorry about that...forgot to include it.

Located in N. Alabama (Scottsboro).

TTT...good stock pieces for sale here.

Thanks.
Old Jun 6, 2006 | 10:44 AM
  #5  
marv's Avatar
Thread Starter
TECH Enthusiast
iTrader: (40)
 
Joined: Jan 2006
Posts: 666
Likes: 0
From: Scottsboro, AL
Default

Up for the morning folks.
Old Jun 8, 2006 | 12:35 AM
  #6  
SSZSLP's Avatar
On The Tree
 
Joined: Dec 2003
Posts: 196
Likes: 0
From: Tulare,CA.
Default

Also, have EGR system and AIR system (minus pump) that I'd sell cheap (read really really cheap!!) if somebody needs it

Still have these parts? Need these,check P.M's
Old Jun 8, 2006 | 02:32 AM
  #7  
red90cobra's Avatar
TECH Addict
iTrader: (36)
 
Joined: Apr 2002
Posts: 2,526
Likes: 0
From: Murphy, Tx
Default

how much shipped to 75094 on the heads
Old Jun 8, 2006 | 10:45 AM
  #8  
marv's Avatar
Thread Starter
TECH Enthusiast
iTrader: (40)
 
Joined: Jan 2006
Posts: 666
Likes: 0
From: Scottsboro, AL
Default

Originally Posted by SSZSLP
Also, have EGR system and AIR system (minus pump) that I'd sell cheap (read really really cheap!!) if somebody needs it

Still have these parts? Need these,check P.M's
I still got them man. I replied to your PM, so check it out and get back to me.

Thanks!
Old Jun 8, 2006 | 10:46 AM
  #9  
marv's Avatar
Thread Starter
TECH Enthusiast
iTrader: (40)
 
Joined: Jan 2006
Posts: 666
Likes: 0
From: Scottsboro, AL
Default

Originally Posted by red90cobra
how much shipped to 75094 on the heads
Let me get them cleaned up and in a box and I'll check on it for you.

I can get pics as well, so send me your email address if you're interested.

Thanks!
Old Jun 9, 2006 | 09:24 AM
  #10  
marv's Avatar
Thread Starter
TECH Enthusiast
iTrader: (40)
 
Joined: Jan 2006
Posts: 666
Likes: 0
From: Scottsboro, AL
Default

All PM's responded to. Original post update to reflect availability.

Thanks!
Old Jun 12, 2006 | 09:49 AM
  #11  
marv's Avatar
Thread Starter
TECH Enthusiast
iTrader: (40)
 
Joined: Jan 2006
Posts: 666
Likes: 0
From: Scottsboro, AL
Default

Bump...
Old Jun 13, 2006 | 11:58 AM
  #12  
marv's Avatar
Thread Starter
TECH Enthusiast
iTrader: (40)
 
Joined: Jan 2006
Posts: 666
Likes: 0
From: Scottsboro, AL
Default

Bump...
Old Jun 20, 2006 | 01:04 AM
  #13  
red90cobra's Avatar
TECH Addict
iTrader: (36)
 
Joined: Apr 2002
Posts: 2,526
Likes: 0
From: Murphy, Tx
Default

Originally Posted by marv
Recently did a H/C swap and have some stock parts laying around that I no longer need. All parts are stock off of a 2000 LS1. Everything is in good working condition and worked perfectly when it came off the car. Not sure how many folks want this stuff, but it'd be perfect for getting a car back up and running temporarily or for a stock daily driver.

1. Stock 241 casting heads w/stock valves and valve springs. No leaks, no cracks.
Price: $150 +shipping SOLD!!!

2. Stock pushrods - perfectly straight and worked just fine.
Price: $30 +shipping

3. Stock cam - not sure of #'s, but as before, is the stock piece that came from GM.
Price: $50 +shipping

4. Stock lifters - work just fine, went with new ones when I did the cam install.
Price: $50 +shipping

Also, have EGR system and AIR system (minus pump) that I'd sell cheap (read really really cheap!!) if somebody needs it. Got someone interested.

I'm sure I've missed something, but that's all I can think of for now. Will have pics of above tomorrow. For pics, just post up, PM or email me at:

JWhiteUAH - at - Hotmail - dot - com

Prefer PayPal, but open to other methods. Will ship at buyers specified carrier. All prices + shipping.

Thanks,
Marv
Thanks for the heads!!!
 




All times are GMT -5. The time now is 01:43 PM.