Vette oil pan, mounts, exhaust manifolds, truck intake, harness, & manifolds
Vette exhaust manifolds, truck intake, injectors, pan setup & harness I have a bunch of stuff leftover that I've bought & can't use for my swap. Pics are good resolution, so I'll link them here vs. inserting them.
Important stuff- please read before asking questions:
Location
Parts are in SW Florida.
Payments
Paypal to a verified address or MO accepted.
Shipping
Prices are shipped continental US via FedEx ground, adult signature required, no foreign shipments. I have a FedEx account & ship 3 times per week, so I can usually ship the next day following payment except for payments on a Friday.
Mileage
I don't know the year or mileage for the Vette stuff. The truck stuff came off the 32K mile 2003 LM7 Avalanche motor I bought at a junkyard.
Questions?
Please PM or EM me if additional info needed. This is not a "hit & run" ad that is posted and never replied to
. Reply here & I'll be notified, I am here usually at least once a day. I will also update it to show anything that is sold.
Dibs?
First one to pay gets the part, will not hold anything.
Trades?
Needed: 1998 PCM.
Feedback
Click on the number by my user name. I don't fool around with buying or selling, i.e. I know what I want for the stuff and won't ask you to make an offer, nor will I increase the price if more than one person is interested (see dibs above). I leave + feedback as soon as I am paid.
Other
All parts are in good condition except as noted, and all were used when I bought them, so they are sold AS-IS.
Vette exhaust manifolds $80
Has EGR provision, so I think these are from an earlier model LS1.
Truck intake from 2003 LM7 5.3L $90
Includes fuel rails and stock injectors.
2003 LM7 (5.3) wiring harness $50
The plug for the crank sensor was cut off but is included. There are a bunch of wires that were cut (looks like they went to the fuse panel). One of the PCM connectors is missing seals and a plastic color piece. I would consider this a parts source harness if you need some wire or plugs, but with some work it could be made to work on a Gen 3 motor. I ended up using an LS1 harness. All injector & coil plugs and most other sensor plugs are OK.
I also have a good truck oil pan/tray/pickup/stick & tube for $ Sold.
I have a bunch of Supra stuff (2 motors & trans & misc parts I won't use) as well, but I figured there would be no market here for this stuff other than as boat anchors or paperweights.
Important stuff- please read before asking questions:
Location
Parts are in SW Florida.
Payments
Paypal to a verified address or MO accepted.
Shipping
Prices are shipped continental US via FedEx ground, adult signature required, no foreign shipments. I have a FedEx account & ship 3 times per week, so I can usually ship the next day following payment except for payments on a Friday.
Mileage
I don't know the year or mileage for the Vette stuff. The truck stuff came off the 32K mile 2003 LM7 Avalanche motor I bought at a junkyard.
Questions?
Please PM or EM me if additional info needed. This is not a "hit & run" ad that is posted and never replied to
. Reply here & I'll be notified, I am here usually at least once a day. I will also update it to show anything that is sold.Dibs?
First one to pay gets the part, will not hold anything.
Trades?
Needed: 1998 PCM.
Feedback
Click on the number by my user name. I don't fool around with buying or selling, i.e. I know what I want for the stuff and won't ask you to make an offer, nor will I increase the price if more than one person is interested (see dibs above). I leave + feedback as soon as I am paid.
Other
All parts are in good condition except as noted, and all were used when I bought them, so they are sold AS-IS.
Vette exhaust manifolds $80
Has EGR provision, so I think these are from an earlier model LS1.
Truck intake from 2003 LM7 5.3L $90
Includes fuel rails and stock injectors.
2003 LM7 (5.3) wiring harness $50
The plug for the crank sensor was cut off but is included. There are a bunch of wires that were cut (looks like they went to the fuse panel). One of the PCM connectors is missing seals and a plastic color piece. I would consider this a parts source harness if you need some wire or plugs, but with some work it could be made to work on a Gen 3 motor. I ended up using an LS1 harness. All injector & coil plugs and most other sensor plugs are OK.
I also have a good truck oil pan/tray/pickup/stick & tube for $ Sold.
I have a bunch of Supra stuff (2 motors & trans & misc parts I won't use) as well, but I figured there would be no market here for this stuff other than as boat anchors or paperweights.
Last edited by V8 Supra Builder; Aug 14, 2006 at 06:25 PM. Reason: Update
Vette oil pan The gasket surface looks to be OK, it is not a show quality pan, but is in good condition. I've had it mounted to my motor once to check clearance & since it wouldn't clear my k-member I took it off and it has been sitting in the garage for like 3 months.
Trending Topics
Dave I got your check today (Saturday) after the bank had closed & I got called out of town for a week, so if I can't get anyone to deposit it while I'm gone, I will deposit it on Saturday 7-15 & will ship the following Monday 7-17. I'll email a tracking # after I ship.
Dave,
I have a tracking # for FedEx and if you need it please PM or EM me. I'll ship it Monday 7-17 so you should have it by the end of the week.
I've left positive feedback for you & would appreciate the same once you get the parts.
I have a tracking # for FedEx and if you need it please PM or EM me. I'll ship it Monday 7-17 so you should have it by the end of the week.
I've left positive feedback for you & would appreciate the same once you get the parts.
