Race stuff for sale
Thread Starter
TECH Junkie
iTrader: (9)
Joined: Jun 2003
Posts: 3,428
Likes: 0
From: Winter Garden, Florida
Race stuff for sale The following parts were only run on my car during limited dyno testing. Eveything is basically brand new.
Buyer to pay shipping on any items. These parts will be shipped UPS from zip code 34787. All items are listed with a very low price and these numbers are firm. Serious inquiries should contact me through email at ep@core-fl.com.
NX Gemini Twin Stage 6 perimeter spray plate kit. This kit is brand new and was only used for testing on the dyno. I had this on an Victor Jr intake with a sheet metal elbow on top of it. This setup made monster power!!! Comes with 6an feed line, short braided lines from solenoids to plate, solenoids(labels are roughed up some from lines rubbing them), plate, standard jets 50 - 300 hp in 50hp increments PLUS 100 - 500hp jets from the Pro Plate kit. I'm also including gaskets, a 4 corner Edlebrock solenoid stand that mounts under the plate and a set of NX bottle brackets. $275 SOLD
Pictured below is the plate flowing along with my second stage custom spray bars shown in the center.
FJO mini-progressive nitrous controller - this is the laptop based controller that will run either 1 or 2 stages and can be activated by time or rpm. Comes complete with original manual and software plus an added adapter cable for a USB connection. $125 SOLD
FJO Wideband AFR controller - 2 channel controller that can be tied into the nitrous controller and set to shut down the nitrous at any given A/F ratio. Included is the original manual and software. $275 SOLD
Buyer to pay shipping on any items. These parts will be shipped UPS from zip code 34787. All items are listed with a very low price and these numbers are firm. Serious inquiries should contact me through email at ep@core-fl.com.
NX Gemini Twin Stage 6 perimeter spray plate kit. This kit is brand new and was only used for testing on the dyno. I had this on an Victor Jr intake with a sheet metal elbow on top of it. This setup made monster power!!! Comes with 6an feed line, short braided lines from solenoids to plate, solenoids(labels are roughed up some from lines rubbing them), plate, standard jets 50 - 300 hp in 50hp increments PLUS 100 - 500hp jets from the Pro Plate kit. I'm also including gaskets, a 4 corner Edlebrock solenoid stand that mounts under the plate and a set of NX bottle brackets. $275 SOLD
Pictured below is the plate flowing along with my second stage custom spray bars shown in the center.
FJO mini-progressive nitrous controller - this is the laptop based controller that will run either 1 or 2 stages and can be activated by time or rpm. Comes complete with original manual and software plus an added adapter cable for a USB connection. $125 SOLD
FJO Wideband AFR controller - 2 channel controller that can be tied into the nitrous controller and set to shut down the nitrous at any given A/F ratio. Included is the original manual and software. $275 SOLD
Last edited by next; Oct 30, 2006 at 03:50 PM.
Trending Topics
Thread Starter
TECH Junkie
iTrader: (9)
Joined: Jun 2003
Posts: 3,428
Likes: 0
From: Winter Garden, Florida
The NX plate kit and Wideband AFR are both sold.
The progressive controller is still available and as mentioned above the selling price is firm so please don't ask for free shipping or a lower offer.
Thanks.
The progressive controller is still available and as mentioned above the selling price is firm so please don't ask for free shipping or a lower offer.
Thanks.
