USED PARTS....
rolling chasis- would like to get 1500 for it. its a silver 1999 body, just over 50k on the clock. there is no spoiler and no hood, unless the buyer wants a lightweight pin-on ss hood, which would be a little extra. there are comp engineering weld in sub-frame connectors on it. no interior in the car at all, although i do have most of the pieces in the attic. they will be included, they just wont actually be installed in the car. right now it has the 9inch in it, so if someone wants the roller with that rear in there, then i would like to get 3k for it.
http://i10.photobucket.com/albums/a1...0/DSCN0089.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0091.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0092.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0093.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0094.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0095.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0096.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0103.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0090.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0083.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0087.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0086.jpg

moser 9 inch rear end- if it doesnt go with the roller, then 1500+a stock 10 bolt.3 channel, locker, 4:11 gears, aluminum center section, 35 spline axles, around 8k miles on it.(local sale only-would drive a reasonable distance to meet someone 1/2way)

weld draglites 15x8 rears and 15x3.5 fronts w/28inch M/T ET drags on the back, and M/T sportsmans up front. i bought the wheels used, but the tires are close to new, only about 10 passes on them. wheels are not perfect, but theyre definitly not bad either. they are probably a 7 out of 10. once again i need to roll the car out of the garage to take pics. this also includes wheel spacers for the front and the mcgard lug nuts necessary for these wheels- $650 for everything
http://i10.photobucket.com/albums/a1...0/DSCN0097.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0098.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0099.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0100.jpg

dennys nitrous ready driveshaft- also around 8k miles on it- SOLD


sheet metal valve covers-SOLD

thunder racing coil relocation kit-SOLD

aluminum fuse box cover painted sebring silver-SOLD
k&n filter-SOLD


BRAND NEW PARTS......

racetronix fuel pump and wiring kit for 99+ f-body SOLD
http://i10.photobucket.com/albums/a1...0/DSCN0067.jpg

spohn solid motor mounts- SOLD

butler aluminum racing seat- same thing as a kirkey, just a different name-$175 (5-point harness not included)
http://i10.photobucket.com/albums/a1...0/DSCN0049.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0051.jpg

comp engineering rear adjustable race shocks-SOLD

b&m hammer shifter-$160
http://i10.photobucket.com/albums/a1...0/DSCN0066.jpg

battery relocation kit, includes taylor aluminum battery box, 1 gauge cable, and taylor on/off switch-$175
http://i10.photobucket.com/albums/a1...0/DSCN0064.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0065.jpg
http://i10.photobucket.com/albums/a1...0/DSCN0063.jpg

pin-on ss hood- weighs about 10 lbs- $300
http://i10.photobucket.com/albums/a1...0/DSCN0068.jpg
http://i10.photobucket.com/albums/a1...0/IMG_0494.jpg

 

links dont work =\

 

yup, i think you have to change all those jpg's to img's.

 

my bad, they were workin yesterday.ill fix em now

 

it's the URLs, they have the dots, incorectly copied. but yeah try the [img] tags that photobucket gives you

 

What are the backspacing on the rears and is the $650 shipped?

 

pm sent on fuse box cover

 

what tranny and rear end were you using with the driveshaft?

 

shipping not included on wheels, but i would be willing to split the shipping if you want them. im honestly not sure the backspacing on the wheels, i bought them used myself, and all i knew was that they fit, lol. let me know tho, thanks

pm returned on fuse cover

 

9 inch and t56

 

Are the rear shocks streetable or just for race cars?

 

CE says to only race with them, but i know quite a few people on this board who use them on the street. i would say try to do a search, and decide if you wanna take the chance from what other people say.

 

consider a trade up on my 2000 z I would trade everything I need $9000 for my zthnks eric m.

 

Please send me pics of the roller. Does it have the wiring harness still? Was it an original m6 or a4?

 

original M6 car, wiring harness is still there, but no computer. i have lots of requests for pics, so i will get it out of the garage tomorrow and take pics, its dark here now so it would be pointless to do it now. i will be sure to get back to you guys.

 

pm sent

 

I would like to also see pics of the rolling chasis and where are you located? Thanks. You can send me pics of the rolling chasis to hotboys_1@verizon.net, thanks.

 

You still have the title for the rolling chasis?

 

clean title on the chasis yes. i will take pics of it tomorrow when i come home from work and get back to everyone

 

Any pics of the wheels since the links don't work??