I'm looking for some truck or car coilpacs. stockers are fine, they just need to work fine and be a full set.
im also looking for a broken genIII camshaft. must have the rearend of the shaft with the cam position sensing unit still intact on the camshaft (dont need the cam pos. sensor, just the cam). any genIII cam will work fine, but i'd prefer to get a lq9 truck cam of any year

also, im looking for a truck PCM/harness 2005 or earlier. an LS1 harness would be sufficient as well. harness and pcm must match.

any comments/suggestions/deals please pm me or email me at jake@brownlures.com or jakebdb56@aol.com

thanks

 

I have two camshafts, both not broken. I belive one is out of a truck, will send you pics you can have either one for $20 plus shipping.

 

I have some coilpacks from a 98 T/A that work perfect. PM me an offer.

 

I have a set of new truck coils (8). Need $175 shipped for them. Thanks, Mac

 

I have a 2003 truck harness that may work for you:


Wire harness pic 2003 LM7 (5.3) wiring harness $50
The plug for the crank sensor was cut off but is included. There are a bunch of wires that were cut (looks like they went to the fuse panel). One of the PCM connectors is missing seals and a plastic color piece. I would consider this a parts source harness if you need some wire or plugs, but with some work it could be made to work on a Gen 3 motor. I ended up using an LS1 harness. All injector & coil plugs and most other sensor plugs are OK.

 

thanks for the offers, I got some coils and pcm/harness finally locally. still interested in those cams...

 

I have my stock cam from my 99 SS for sale if you want it.

 

40 shipped for my 2001 SS cam

 

sorry guys, got everything now. thanks for the offers.