Garage Sale (stock & mods)
11-14-2006, 11:50 AM
#1
Garage Sale (stock & mods) Hughes Performance "Street" 4L60E (375hp) $400
408 Turbo Motor:
The setup is as follows:
6.0L Truck block
Lunati 4340 4.000" crank
Lunati Pro Mod rods
Diamond -30cc dished boost pistons
Schneider 238/238 .630"/.630" 115lsa custom cut cam
Federal Mogul bearings
Callies Billet Main Caps
ARP rod bolts and main studs
TCI Flexplate
Rotating assembley has been internally balanced, line honed, bored, and assembled.
Block has been o-ringed for .030" (i think) rings
I paid almost $4000 for the rotating assembley alone, plus $600 for the main caps, $400 for the cam, plus block, bolts, etc...
Labor into the machining and assembley about $1500
This motor is setup to run 9.0:1 w/ a 64cc head.
I was planning to make about 1200 hp with a large single on this setup, but now have gone N20
I would like to get $5000 for all of it
Garret 60-1 Turbo (needs to be rebuilt) $250
Most out of a 99 TA
Drivers side airbag - $75
Pass. Side Airbag - $100
Stock dark grey carpet - $50
Stock Drivers side seat, dark grey (w/power) - $100
Stock Pass. Side seat, dark grey (w/o power) - $75
Stock water pump - $30 sold
Stock radiator - $50 sold
Stock 853 heads - $200
Stock 706 heads - $200
Stock 317 heads - $200
Hand Ported 317 heads - $300
Stock rockers (16) - $50
Stock 5.3L shortblock (w/cracked piston) - $400
Stock NBM (non-WS6) hood (pics) - $200
Prices do not include shipping..
PM me for details or pics..
408 Turbo Motor:
The setup is as follows:
6.0L Truck block
Lunati 4340 4.000" crank
Lunati Pro Mod rods
Diamond -30cc dished boost pistons
Schneider 238/238 .630"/.630" 115lsa custom cut cam
Federal Mogul bearings
Callies Billet Main Caps
ARP rod bolts and main studs
TCI Flexplate
Rotating assembley has been internally balanced, line honed, bored, and assembled.
Block has been o-ringed for .030" (i think) rings
I paid almost $4000 for the rotating assembley alone, plus $600 for the main caps, $400 for the cam, plus block, bolts, etc...
Labor into the machining and assembley about $1500
This motor is setup to run 9.0:1 w/ a 64cc head.
I was planning to make about 1200 hp with a large single on this setup, but now have gone N20
I would like to get $5000 for all of it
Garret 60-1 Turbo (needs to be rebuilt) $250
Most out of a 99 TA
Drivers side airbag - $75
Pass. Side Airbag - $100
Stock dark grey carpet - $50
Stock Drivers side seat, dark grey (w/power) - $100
Stock Pass. Side seat, dark grey (w/o power) - $75
Stock water pump - $30 sold
Stock radiator - $50 sold
Stock 853 heads - $200
Stock 706 heads - $200
Stock 317 heads - $200
Hand Ported 317 heads - $300
Stock rockers (16) - $50
Stock 5.3L shortblock (w/cracked piston) - $400
Stock NBM (non-WS6) hood (pics) - $200
Prices do not include shipping..
PM me for details or pics..
Last edited by TchargedLS1TA; 11-28-2006 at 07:18 PM.
Trending Topics
11-15-2006, 03:27 PM
#9
Originally Posted by 94'BLKBRD
do you have a power steering pump?
11-26-2006, 03:05 PM
#17
Originally Posted by 02silvaZ
I am interested in carpet, is it in good shape? can you PM me some pictures
The transmission has 42k total miles on it. It was gone through by Hughes at 36k miles and they upgraded the clutches and valvebody. I will ship the tranny, shipping will probably be between $75-$125 for freight..
