LS6 Stage II heads, Lunati Cam, Shaft mount Rocker's

Thread Tools

Search this Thread

Feb 13, 2007 | 10:42 PM

#21

Sabre002

12 Second Club

iTrader: (7)

Joined: May 2004

Posts: 543

Likes: 1

From: Columbia, SC

I'm looking to get the heads, you say they have not been milled right. I'm just trying to make sure that they will work with my .589/.589 lift 236/236 dur 112LSA came with stock rocker ratio and stock pistons.

Feb 14, 2007 | 10:24 AM

#22

01blackbeast

Thread Starter

Staging Lane

iTrader: (41)

Joined: Jul 2006

Posts: 97

Likes: 0

From: Warfordsburg, Pa

This setup didn't work with my cam. It's a .578/.578 lift 232/232 dur 112+0 LSA. We were using the stock rockers with that.

Feb 14, 2007 | 03:03 PM

#23

Sabre002

12 Second Club

iTrader: (7)

Joined: May 2004

Posts: 543

Likes: 1

From: Columbia, SC

So then the heads are milled?`

Feb 14, 2007 | 04:37 PM

#24

FRANZ

12 Second Club

Joined: Jan 2005

Posts: 52

Likes: 0

How much for heads and rockers. PM please.

Feb 15, 2007 | 11:01 AM

#25

01blackbeast

Thread Starter

Staging Lane

iTrader: (41)

Joined: Jul 2006

Posts: 97

Likes: 0

From: Warfordsburg, Pa

The heads are not milled. Patriot said they are at regular deck height.

Here are some pics of the rocker arm assy. for those who asked.

Feb 16, 2007 | 11:58 AM

#26

01blackbeast

Thread Starter

Staging Lane

iTrader: (41)

Joined: Jul 2006

Posts: 97

Likes: 0

From: Warfordsburg, Pa

Rocker arm assembly is SOLD. Thanks.

Feb 16, 2007 | 01:18 PM

#27

NONOS

Staging Lane

iTrader: (3)

Joined: Nov 2005

Posts: 50

Likes: 0

How much for heads and cam?

Feb 17, 2007 | 11:11 AM

#28

01blackbeast

Thread Starter

Staging Lane

iTrader: (41)

Joined: Jul 2006

Posts: 97

Likes: 0

From: Warfordsburg, Pa

Replied to all pm's. TTT

Feb 17, 2007 | 07:49 PM

#29

jamesbtri

Teching In

Joined: Feb 2007

Posts: 26

Likes: 0

I will take the cam Pm me

Feb 17, 2007 | 08:01 PM

#30

speedracer5532

9 Second Club

iTrader: (8)

Joined: Jul 2004

Posts: 920

Likes: 4

From: Berkeley Springs, WV

I think he decided to keep the cam, or I sure hope he did since to put the timing chain cover, water pump, and radiator back on.

Feb 17, 2007 | 11:40 PM

#31

01blackbeast

Thread Starter

Staging Lane

iTrader: (41)

Joined: Jul 2006

Posts: 97

Likes: 0

From: Warfordsburg, Pa

Yeah, I'm going to keep the cam. Especially since John already put everything back on...unless it's an outrageous offer that John and I couldn't refuse.