Still looking for #9, does anyone have two of them?

 

still looking for the #7. Three sets of incomplete rear brakes. THis is the last part that I need.

 

I have them. Did a complete replacement of the entire rear of the car with all new parts. You still need the #7's?

 

Yes! I just need one of them, but if you dont want to sell just one, I'll take both.

 

Got it today Mark, thanks so much!!!

 

I seem to have misplaced my #9, does anyone have two #9's? or if you have yours apart, can you give me the dimensions, so I can have some made up? thanks.

 

Bump for #9

 

ttt, looking for two #9's

 

Once again, if anyone has their rear e brakes apart, can you give me the dimensions of #9?

D

 

to the top

 

Is #9 the pin that goes inside the adjuster?? if I'm correct it is 3/16" Diameter, and 13/16" long with the tip on both ends being slightly rounded. Sorry I can't send you the pins but hopefully the measurements will help you out.

 

Yes! that would be it. do you have one or two?

 

Read my post above, I was editing when you last posted.

 

cool, so its not tapered. Would you say the ends are rounded, like a pushrod, or just bevelled? THanks for the info!

 

More bevelled if I had to choose between the two.

 

thanks man, I'll let eveyone know how they worked. I can't believe Im the only one that cant find them, having received three sets of rear breaks, all incomplete.

 

No problem, hopefully it works out for you. I bought new backing plates for my future 9" upgrade from my 12 bolt. It's sad that you can't buy the individual pieces of the backing plates from a Dealership...has to be the whole thing or nothing. Sucks that you have to go through all of this just for a few pieces. Good luck with it!!