Feeler '99 camaro ss m6
#1
Teching In
Thread Starter
Join Date: Apr 2006
Location: Oak creek, WI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Feeler '99 camaro ss m6
SOLD!!!
alrighty... i'm looking to sell my white 1999 camaro ss(this is a clone!) m6 t-tops with only 40,0xx miles on it. This car has been babied its whole life. i am the 3rd owner. All the work has been performed at Speed inc in IL. The vehical is in excellent shape in and out.
Interior:
Grey leather (not a tear or wear mark at all!) i have 2 sets of floor mats
Hurst shifter
Exterior:
Good tread on the tires
one small door ding thats not even noticable
this is a clone so theres an aftermarket hood and spoiler
Engine:
Ls6 intake manifold
NGK spark plugs
Other mods:
Dyna tech headers&catted y-pipe
Slp catback
KONI adjustable shocks
bigger front sway bar
Air box free mod
EGR blocked off
Dyno tuned at speed inc. 330 RWHP 340RWT (very conservitive)
Front Strut tower brace
Sub frame connectors
All in all this car is ready to go. The one issue that it has is when Speed inc installed the subframe connectors, the y-pipe tends to rub slightly on the drivers side connector on a fast launch. Its not affecting performance or driveability. I also have Replacement BREMBO rotors and hawk pads to go with the car. NO leaks. No funny noises. Doesnt burn oil. Headlights are clear and not faded or cloudy! I just changed the oil with mobile one synthetic so you have another 3k miles to go! I have all the paper work to go with the car including a dyno sheet. It drives straight and has a clean title. Asking $12,000 obo or partial trade for a cheap lt1 m6... i am not in any hurry to sell my car so NO LOW BALLING!
MORE PICS ON SECOND PAGE!!!
alrighty... i'm looking to sell my white 1999 camaro ss(this is a clone!) m6 t-tops with only 40,0xx miles on it. This car has been babied its whole life. i am the 3rd owner. All the work has been performed at Speed inc in IL. The vehical is in excellent shape in and out.
Interior:
Grey leather (not a tear or wear mark at all!) i have 2 sets of floor mats
Hurst shifter
Exterior:
Good tread on the tires
one small door ding thats not even noticable
this is a clone so theres an aftermarket hood and spoiler
Engine:
Ls6 intake manifold
NGK spark plugs
Other mods:
Dyna tech headers&catted y-pipe
Slp catback
KONI adjustable shocks
bigger front sway bar
Air box free mod
EGR blocked off
Dyno tuned at speed inc. 330 RWHP 340RWT (very conservitive)
Front Strut tower brace
Sub frame connectors
All in all this car is ready to go. The one issue that it has is when Speed inc installed the subframe connectors, the y-pipe tends to rub slightly on the drivers side connector on a fast launch. Its not affecting performance or driveability. I also have Replacement BREMBO rotors and hawk pads to go with the car. NO leaks. No funny noises. Doesnt burn oil. Headlights are clear and not faded or cloudy! I just changed the oil with mobile one synthetic so you have another 3k miles to go! I have all the paper work to go with the car including a dyno sheet. It drives straight and has a clean title. Asking $12,000 obo or partial trade for a cheap lt1 m6... i am not in any hurry to sell my car so NO LOW BALLING!
MORE PICS ON SECOND PAGE!!!
Last edited by StrokedEVO; 05-12-2007 at 11:01 PM.
#2
Teching In
Thread Starter
Join Date: Apr 2006
Location: Oak creek, WI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
car was just washed in pics... also my camera is crappy! the car is located in milwaukee, WI
also looking for partial trades for a lt1 "race car" or cheap lt1 m6 car
also looking for partial trades for a lt1 "race car" or cheap lt1 m6 car
Last edited by StrokedEVO; 04-07-2007 at 08:32 PM.
#3
Teching In
Join Date: Apr 2007
Location: Milwaukee, WI
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Oh man!! This car is exactly what im looking for, to bad you werent sellin this a couple months from now. Just wondering you said its a ss but why are there z28 badges on it??
#5
Teching In
Thread Starter
Join Date: Apr 2006
Location: Oak creek, WI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by osiris152006
Oh man!! This car is exactly what im looking for, to bad you werent sellin this a couple months from now. Just wondering you said its a ss but why are there z28 badges on it??
also forgot to add it has:
KONI adjustable shocks
Bigger front swaybar for improved handling
I also have Replacement BREMBO rotors and hawk pads to go with the car!
Trending Topics
#8
Teching In
Thread Starter
Join Date: Apr 2006
Location: Oak creek, WI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RedRocketZ28
Looking for an M6 LT1 huh? Mine has 67k on it and I would have no idea how much to ask for it. I am beginning to search for a LS1 car. PM me if you want to.
im was looking to stay around $5k for a trade... so i am not sure how much you car is worth. where are you located?!?!
#12
Staging Lane
iTrader: (1)
Join Date: Nov 2005
Location: chitown
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Hey ill trade u heads up, i know u want somthing around 5k but i thought id throw it out there, scroll down to find pics of my 97 WS6
http://www.chitownracing.com/forums/...ad.php?t=71313
http://www.chitownracing.com/forums/...ad.php?t=71313
#13
Teching In
Thread Starter
Join Date: Apr 2006
Location: Oak creek, WI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sick97WS6
Hey ill trade u heads up, i know u want somthing around 5k but i thought id throw it out there, scroll down to find pics of my 97 WS6
http://www.chitownracing.com/forums/...ad.php?t=71313
http://www.chitownracing.com/forums/...ad.php?t=71313
cant veiw it... not a member
#15
Teching In
Thread Starter
Join Date: Apr 2006
Location: Oak creek, WI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
#16
can you PM me your number, I am located in Chicago and can come check the caqr out whenever it's a good time for you. I am very interested in purchasing an LS1 within the next 2 weeks or so
#17
Teching In
Thread Starter
Join Date: Apr 2006
Location: Oak creek, WI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by policeguy219
can you PM me your number, I am located in Chicago and can come check the caqr out whenever it's a good time for you. I am very interested in purchasing an LS1 within the next 2 weeks or so
PM sent
#19
Teching In
Thread Starter
Join Date: Apr 2006
Location: Oak creek, WI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by l2ob
any engine pics and has it been smoked in etc? accidents?