EFIlive Flashscan version 1.2 cable scan only, 2 98 PCMs
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
EFIlive Flashscan version 1.2 cable scan only, 2 98 PCMs EFILive version 1 scan only cable, has two 0-5v inputs, one thermocouple input, its USB and has stand alone black box logging. No laptop needed to log (but you need a PC to read the logs and run the software naturally). Also has bidirectional controls to lock a converter on the dyno, do crank relearns, cylinder balance tests etc I used it to upgrade to V2 and it can no longer program anything. V1 is good for LS1 and LS6 cars, up to 2005 gas and diesel trucks.
Once again it is ONLY good for scanning, have all the cables and its in the origial box. This is great if you have the older HPtuner w/o the enhanced input or LS1edit and you want an excellent scan tool with wideband inputs to use along with it, plus the black box logging is great if you have a race car and dont want a laptop in the car.
EFIlive SOLD
also have two 1998 F-body PCMs, both are good but both will need to be flashed back to stock or your own calibrations, didnt get a chance to do it.
PCMs sold
Once again it is ONLY good for scanning, have all the cables and its in the origial box. This is great if you have the older HPtuner w/o the enhanced input or LS1edit and you want an excellent scan tool with wideband inputs to use along with it, plus the black box logging is great if you have a race car and dont want a laptop in the car.
EFIlive SOLD
also have two 1998 F-body PCMs, both are good but both will need to be flashed back to stock or your own calibrations, didnt get a chance to do it.
PCMs sold
Last edited by kp; May 31, 2007 at 01:11 PM.
