SOLD! - 4L80E from 2003 2WD

 
Thread Tools
 
Search this Thread
 
Old Jun 3, 2007 | 04:32 AM
  #1  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Arrow SOLD! - 4L80E from 2003 2WD

32,000 miles. This is the transmission only. I can get the stock torque convertor and a stock uncut wiring harness that came with this for the tranny and 6.0 liter it was seperated from.

This transmission was from a flood salvaged pickup truck. I bought it from a guy local and the seals still look fine on it and there is nothing inside of it besides clean red transmission fluid. No way to tell how bad the flood damage was to the truck really but this transmission is fine internally. The sensors on the side are not corroded or show any visual signs of issues. They should be fine but I can not guarantee them because of the fact that they could have possibly been submerged in water before. Just being straight up on this so the buyer will know.

Im asking $800 OBO picked up. Dont know how much shipping will be but I have no problem shipping.

EDIT: Price reduced to $700 OBO

Consider a partial trade on adjustable torque arm (prefer body mount style), good front or rear suspension parts, a good nitrous kit(sold my plate kit and wish I hadn't), a flexplate to fit a TH350, a dipstick that works with a TH350 in a Fbody, or even a nice pistol(yeah I like guns too). Dont offer to trade anything worth more than within $100 of this tranny because I need at least that much extra cash in the deal to at least pick up a used Flexplate and Dipstick tube.

Last edited by juiced_z28; Jun 7, 2007 at 07:16 AM.
Old Jun 3, 2007 | 01:16 PM
  #2  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Default

Bump, OBO, Need a fast sell and some Paypal.
Old Jun 4, 2007 | 07:26 PM
  #3  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Default

Nobody wants a 4L80E?? $700 sound better including a stock converter and wiring harness?
Old Jun 5, 2007 | 09:29 AM
  #4  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Default

I thought this thing would disappear in no time. Well I have decided to have it looked over today and the sensors checked out. $60 is not bad to be able to guarantee this thing to be right. Price is still $700 OBO.
Old Jun 5, 2007 | 12:01 PM
  #5  
Shamson5.7's Avatar
TECH Enthusiast
iTrader: (5)
 
Joined: Oct 2005
Posts: 676
Likes: 0
From: Denver
Default

Will this be a direct bolt up to an LS1?
Old Jun 5, 2007 | 03:17 PM
  #6  
slow95z's Avatar
TECH Regular
iTrader: (33)
 
Joined: Dec 2006
Posts: 495
Likes: 0
From: Dublin Ga
Default

pm'ed ya!
Old Jun 5, 2007 | 06:22 PM
  #7  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Default

I know it will bolt up as far as to the engine, but if you are talking about to a particular car such as an Fbody you either need a crossmember or you can modify one from an M6. There will be the electrical compatibility and a few other details. I have not done the swap and after buying this realized I did not have the money for a good Torque Converter and all that so I am going to continue with the TH350 install that I am $100 if that from completing.

Just do a search on the board, there is not a lot that I can tell you about the actual install since I have not done it.
Old Jun 6, 2007 | 08:17 PM
  #8  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Default

Lots of interest but still waiting to strike a solid deal. Working with Slow95Z first for now then the dude with the kickass Typhoon is behind him. Things sure are going slow with this and I was to get my car together.

The transmission and sensors checked out all good and it is ready to go, so lets see some more interest here in case these others back out.
Old Jun 7, 2007 | 07:14 AM
  #9  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Default

3 people so far that seem very interested in getting this but I have yet for someone to ask for a paypal address to send some money.
Old Jun 8, 2007 | 07:18 AM
  #10  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Default

Still trying to work out deals on this thing, will post up as soon as something solid is set up. It may be pending but am waiting on a sure answer from Slow95Z and there are fairly solid interested parties behind him. But again, no one trying to give me any money for it yet, lol. Also any advice on who is best to ship this with???
Old Jun 8, 2007 | 12:44 PM
  #11  
bobvon's Avatar
Teching In
iTrader: (1)
 
Joined: Jun 2003
Posts: 3
Likes: 0
Default

If this isnt sold I have the cash. I can also pick up. But I dont want to interfere with any previous commitment.
Old Jun 11, 2007 | 03:02 AM
  #12  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Default

Been a couple of days since I heard from the primary interested party that Im holding this deal out for. Still no cash or nothing worked out. Granted he was waiting for me as I am searching shipping options, but I made some progress and he hasnt checked back with me to let me know his shipping preferences and what is affordable shipping wise. I have checked with UShip.com and am calling DHL in the morning and have some other freight companys working with me.

As of now it is not sold and I do not have a deposite on it, so TTT and will post back up when I know more about the status of the current interested parties.
Old Jun 12, 2007 | 03:11 PM
  #13  
juiced_z28's Avatar
Thread Starter
On The Tree
iTrader: (12)
 
Joined: Dec 2004
Posts: 103
Likes: 0
From: Worthington, KY
Default

$old.
 




All times are GMT -5. The time now is 06:38 PM.