The wife is pregnant so I need to move some stuff ...

Used NX NXL Direct port kit for sale its the one that plugs under the injectors with a fuel accumulator, Purge noid, about 16ft 4 an line high polished 10lb NOS bottle , MSD window switch, NX 3 switch panel for a F-body as well this is a complete kit 890.00 shipped

If you dont need the bottle, purge,feed line,Window Switch or switchs the NXL kit will be 590.00 Here is the link from when I got the kit
https://ls1tech.com/forums/lsx-parts-sale/703182-nxl-kit-part-out.html

2 - New Dyno Tune Nitrous noids 50.00 each

2 - Used NOS Supershot NOS noids 45.00 each

1- Big NX noids 95.00 Used only a few times

Valve cover spacers for 99-up LS1's Sold

SVO's 30's sold *Chris Gage*

MAF Translator 60.00

Dennys Steel Nitrous drive shaft Factory length 1350 yoke this was in my car with a 9" I went to a Carbon Fiber it has about 5k on it Sold *I8RICE*

4 Used 15x10 Weld Draglights less then 3k on one pair and the other pair has about 10 track passes all four have a 4 1/2 backspace 260.00 a pair

Used 4.10's with shims and crush coller and new pinion bearing like new about 2k on them they were in a friends car and he went to a 12 bolt. Plus 2 qts of fluid and poss additive only thing really needed for instal would be a gasket ! Sold !!

Possibly a extra complete 346 as well the block is a 99 has about 45k on it. ARE Heads 0 miles on them, ARP head bolts, F11 Sold !!!

AFR 225's they are sold !! *LOSLS2*

All prices do not inclued shipping My cell # is 772-519-0989

thanks,
Mike H.

 

I have a 95 T/A and am using the factory 4L60E and 10 bolt...will the driveshaft be a direct bolt in?

Thanks,
Brandon

 

pics of afrs to Racingspeed@aol.com

 

there's no length difference between a 9in and 12 bolt right? The same size DS will fit?

any pics of it? jdresser1@comcast.net

 

AFR's are sold.

 

what brand are the 4.10's

 

List has been updated, sorry I am not sure of the brand the only thing on the side is 37x9 2212/01

 

A few things have been add to the list.

 

T T T

 

specs on ARE heads?

 

I met your old man last night. Nice guy. He helped me out some with the converter swap.

LOS

 

really? my dads not so smart when it comes to car ****. i hope you didnt listen to him! where did you see him at?

 

LS2Formula's house. He was getting his windows tinted on the Lexus. He mostly held the light

 

he usually is well LIT!

 

250 shipped on the wheels? are these set up for a fbody?

 

Yes they are if your rear is narrowed a little if its a stock rear they are not for you unless your are going order a narrowed rear

 

They flowed a true 308 @ 650 I believe. They have a 2.08 intake valve. Mike @ TEC did a freshing up job on them the have the BB chevy diamiter springs on them. They have not been mounted on a motor since I got them back. They flowed a few other name brands that day of other LS1 heads that supposedly flowed in the 3's but they only hit in the high 280's which one of the set's is @ Marty's shop in stuart they use to be on the Blk car. The ones with the 2.05 valves.

 

with the 208s will they fit a 5.7? will you pm me a price?

 

whats the largest shot on this kit?

 

Yes they will !!! Call me today I will hook you up on a great deal since you have done the same with me in the past