ls engine lift plate
Thread Starter
LS1TECH Sponsor
iTrader: (5)
Joined: Sep 2007
Posts: 645
Likes: 0
From: Moline, ILLINOIS
ls engine lift plate Ls1 lift plate 49.95
this unit is great for removing engines and transmissions from project cars
It bolts to the top of the engine where the knock cover originally was and allows a few lift points to swing the motor into any postition needed.
Each unit is cut on a cnc machine to precise tolerances
These units are also zinc plated.
5 dollar shipping in the usa!
http://carshop.carshopinc.com/produc...011/C/S%202365
this unit is great for removing engines and transmissions from project cars
It bolts to the top of the engine where the knock cover originally was and allows a few lift points to swing the motor into any postition needed.
Each unit is cut on a cnc machine to precise tolerances
These units are also zinc plated.
5 dollar shipping in the usa!
http://carshop.carshopinc.com/produc...011/C/S%202365
Ls1 lift plate 49.95
this unit is great for removing engines and transmissions from project cars
It bolts to the top of the engine where the knock cover originally was and allows a few lift points to swing the motor into any postition needed.
Each unit is cut on a cnc machine to precise tolerances
These units are also zinc plated.
5 dollar shipping in the usa!
http://carshop.carshopinc.com/produc...011/C/S%202365
this unit is great for removing engines and transmissions from project cars
It bolts to the top of the engine where the knock cover originally was and allows a few lift points to swing the motor into any postition needed.
Each unit is cut on a cnc machine to precise tolerances
These units are also zinc plated.
5 dollar shipping in the usa!
http://carshop.carshopinc.com/produc...011/C/S%202365
