Futral F13 Cam for sale (NEW)

 
Thread Tools
 
Search this Thread
 
Old Dec 31, 2007 | 09:48 AM
  #1  
BROLLN's Avatar
Thread Starter
Teching In
iTrader: (5)
 
Joined: Sep 2006
Posts: 45
Likes: 0
From: Ohio
Default Futral F13 Cam for sale (SOLD)

Ok this is a new cam straight from Futural Motorsport.

FMS Custom Grind Camshaft - 230"/232" .595"/.585" 112LSA - aggressive profile with a 2500-6800 RPM range, rough idle

Great cam with good numbers, I just never installed it and now have sold my car. So my loss is your gain.

Asking $270.00 DLVD
Again this is new never installed so please no low ballers.

pm if interested.
B

Last edited by BROLLN; Jan 2, 2008 at 11:24 PM. Reason: SOLD
Old Dec 31, 2007 | 09:53 AM
  #2  
Ryans_pewter_ss's Avatar
TECH Enthusiast
iTrader: (9)
 
Joined: Nov 2007
Posts: 743
Likes: 0
Default

is it cam only? What else do i need?
Old Dec 31, 2007 | 10:53 AM
  #3  
Evans752's Avatar
TECH Enthusiast
15 Year Member
iTrader: (29)
 
Joined: Jan 2005
Posts: 565
Likes: 1
From: Logan, West Virginia
Default

Not trying to butt in but these cams (F13) are awsome, thats why I have it LOL, but you will need some duel valve springs (Comp Cams 921 duel valve springs or Patriot duel valve springs) I run the Comps 921 and and some 7.40 pushrods and a good tune. Good Luck on the sale.
Old Dec 31, 2007 | 10:57 AM
  #4  
Ryans_pewter_ss's Avatar
TECH Enthusiast
iTrader: (9)
 
Joined: Nov 2007
Posts: 743
Likes: 0
Default

I want it! wheres the best place to get the springs and pushrods? And also should I change the timing chain since I'll be in there and ported ls6 oil pump.
Old Dec 31, 2007 | 11:52 AM
  #5  
Evans752's Avatar
TECH Enthusiast
15 Year Member
iTrader: (29)
 
Joined: Jan 2005
Posts: 565
Likes: 1
From: Logan, West Virginia
Default

Thunder Racing, MTI are some of the companys I have had good success with in getting most of my stuff off of. Any of the sponsors on here that care these products can help you out im sure.
Old Dec 31, 2007 | 12:16 PM
  #6  
CJDZ24_Z28's Avatar
TECH Addict
iTrader: (75)
 
Joined: Aug 2005
Posts: 2,167
Likes: 1
From: South Jersey (15 miles from Atlantic City)
Default

www.texas-speed.com best place period
Old Dec 31, 2007 | 12:19 PM
  #7  
quiet_storm98's Avatar
12 Second Club
iTrader: (48)
 
Joined: May 2005
Posts: 2,017
Likes: 20
From: Virginia
Default

dang i would buy this but i just bought a pat g cam that has similar specs..bump for you
Old Dec 31, 2007 | 12:44 PM
  #8  
BROLLN's Avatar
Thread Starter
Teching In
iTrader: (5)
 
Joined: Sep 2006
Posts: 45
Likes: 0
From: Ohio
Default

It is cam only.. no springs...

sale pending to Ryans Pewter SS. thanks
Old Jan 2, 2008 | 08:18 PM
  #9  
BROLLN's Avatar
Thread Starter
Teching In
iTrader: (5)
 
Joined: Sep 2006
Posts: 45
Likes: 0
From: Ohio
Default

Ryans Pewter SS hasn't got back to me so its still up for sale..anyone else..?
Old Jan 2, 2008 | 08:41 PM
  #10  
voodoochi1d's Avatar
Staging Lane
iTrader: (6)
 
Joined: Oct 2007
Posts: 62
Likes: 0
From: West of Atlanta
Default

Just sent PM, send me patment instructions, I just bought a F12 cam, but reeally want F13, so I guess I have an F12 up for sale if Brolln will confirm sale here.


Thnx
Old Jan 2, 2008 | 09:03 PM
  #11  
voodoochi1d's Avatar
Staging Lane
iTrader: (6)
 
Joined: Oct 2007
Posts: 62
Likes: 0
From: West of Atlanta
Default

do you have the cam card?
Also what is the advance
Old Jan 2, 2008 | 09:34 PM
  #12  
BROLLN's Avatar
Thread Starter
Teching In
iTrader: (5)
 
Joined: Sep 2006
Posts: 45
Likes: 0
From: Ohio
Default

No cam card, never got one with the cam, hell the cam was only out of the package once when I got it. It could be in there I will have to check if not, I guess I could contact them and try to get it, time is short though I off to the sandbox real soon, Futral though, as most will testify, they are really good and stand behind their product...

Sale is pending... W/voodoo

Last edited by BROLLN; Jan 2, 2008 at 09:40 PM.
Old Jan 2, 2008 | 09:41 PM
  #13  
Damian's Avatar
LSX Mechanic
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (89)
 
Joined: Nov 2001
Posts: 10,396
Likes: 13
From: Atlanta
Default

BROLLN, I am Voodoo's engine builder.

How much advance does this cam have in it?

Did you order this from Futral Motorsports? I've never known them to send a cam without the card.

Thanks

-Spartan Performance
Old Jan 2, 2008 | 09:56 PM
  #14  
BROLLN's Avatar
Thread Starter
Teching In
iTrader: (5)
 
Joined: Sep 2006
Posts: 45
Likes: 0
From: Ohio
Default

I just went out in the garage, opened the cam up for the second time since I got it, and even though it came straight from them there isn't one, I could have lost it I guess I'm military and have moved around alot in the last year.

History behind the cam---What happened was they replaced the cam that I had with this one, and I never installed it. I guess since it was a replacement cam they didn't send one. Either way, Just let me know, if I don't sell it here its going on EBAY.. Its a steal at this price, never being installed.
Old Jan 2, 2008 | 10:00 PM
  #15  
Damian's Avatar
LSX Mechanic
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (89)
 
Joined: Nov 2001
Posts: 10,396
Likes: 13
From: Atlanta
Default

Can you posts pics of the cam where it's stamped "Futral Motorsports" and "230/232" cam please? It's on the very end of the cam.

My customer is dead serious about buying, we need a cam asap. But I want to make sure we're getting what we pay for. No offense, just business.

Thanks in advance.
Old Jan 2, 2008 | 10:06 PM
  #16  
james562's Avatar
TECH Fanatic
iTrader: (35)
 
Joined: Aug 2004
Posts: 1,016
Likes: 0
From: Paramount CA
Default

I will take it abd I have paypal available and will cover the paypal fees 275 right here right now... Let me know
Old Jan 2, 2008 | 10:11 PM
  #17  
voodoochi1d's Avatar
Staging Lane
iTrader: (6)
 
Joined: Oct 2007
Posts: 62
Likes: 0
From: West of Atlanta
Default

Still working with Brolln on the sale. If you can send me a pic of end with the stamp, money is in ur account
Old Jan 2, 2008 | 10:24 PM
  #18  
BROLLN's Avatar
Thread Starter
Teching In
iTrader: (5)
 
Joined: Sep 2006
Posts: 45
Likes: 0
From: Ohio
Default

Play by play, for all those that want it


Old Jan 2, 2008 | 10:27 PM
  #19  
voodoochi1d's Avatar
Staging Lane
iTrader: (6)
 
Joined: Oct 2007
Posts: 62
Likes: 0
From: West of Atlanta
Default

money is on its way
Old Jan 2, 2008 | 10:32 PM
  #20  
Damian's Avatar
LSX Mechanic
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (89)
 
Joined: Nov 2001
Posts: 10,396
Likes: 13
From: Atlanta
Default

Does that say "112" or "+2". I can't tell

Either way, we're running it I guess lol



All times are GMT -5. The time now is 12:35 AM.