Bump.

 

Up Top

 

Back to the top ^^^^^^^^^^^^^^^^^

 

Bump Bump Bump. I need a Complete Pedal assembly with all the switches and Clips.

and I need All the Hydrolics.

Need Clutch and PP

 

back to the top

 

Pedals $125 shipped. What else do you need?

 

Anybody Got the U Bolt and Nuts For the master cylinder???????????

Thanks Guys

 

Yup, I have everything that you need. Give me a list, and I will give you a price. I still have the transmission, the Ubolt, and nuts for the master cylinder. I have all the mounts, the petals, the hydraulic lines, ect. Let me know what you need.

Justin

 

Bump for a Master Cylinder U Bolt and the nuts that go with it.

Does anyone know If I will need a T56 Exhaust Mount or will the A4 Exhast Mount work on a t56? If the A4 mount wont work I also need a T56 Exhaust Mount.

Thanks

 

Shifter

Lower Shift Boot

6-speed console

Clutch disc, Pressure Plate and Flywheel

T56 Crossmember

Torque arm mount

01-02 Master Cylinder

 

Do you even have the trans yet??

 

no im going to wait and buy one after i get everything else i need, I want to make sure I have every part for the swap,down to every nut and bolt, then im going to buy a tranny and bellhousing right before i do the swap. I may shop around for a while on that wanna try and get a good one for a decent price

 

Im pretty sure that I have everything that you need for the swap. My trans has 27K on it. I want $2K for the trans, and I will hook you up with some of the other parts that you need. I still have everything from the clutch petal to the clutch itself. So if you need anything, let me know.

 

Bump for Master Cylinder U Bolt And Nuts,

T-56 Exhaust Mount

Thanks to everyone who has replied

 

I have both of those. I'll sell it to ya for $80 including shipping.

 

I have a pedal assy with switched, a MC (u-bolt too). This from an '02. Let me know if you still need these.

Steve

 

Ok updating parts list.

The parts I have are

-Shifter
-all the boots
-6-speed console
-Flywheel, Clutch disc and PP
-t56 crossmember
-t56 torque arm mount
-Master Cylinder (01,02) style

Parts I still need are.

-t56 Exhaust Mount (bolts to trans to support stock y-pipe)
-Pedals (with switches and rod clips)
-Slave
-torque arm mount (BOLTS) just need the bolts, I dont know if the bolts from the A4 mount will work?
-inspection cover
-Clutch alignment tool

Thanks

 

Parts I still need are.

-t56 Exhaust Mount (bolts to trans to support stock y-pipe)
-Pedals (with switches and rod clips)
-Slave
-torque arm mount (BOLTS) just need the bolts, I dont know if the bolts from the A4 mount will work?
-inspection cover
-Clutch alignment tool

Thanks

Bump Bump

 

I have a complete pedal assembly, Hydraulic slave cylinder and braided hose, clutch fork and I think that is it.