FS: SSRA, motor mounts, used slave cylinder
I've got some stuff laying around that I don't need anymore, so it has to go. First up, a SSRA kit. I had this on my car for about a month or two until I went to a local muffler shop and the dumb monkey guiding me up the lift failed to tell me the lower scoop was going to get snagged. Long story short, the bottom piece separated and a small piece also broke off. I ended up putting some gorilla glue and let it cure more than 24 hours at each separation. I had re-installed it to make sure it held, and it did. Anyways, here are a few pics:




It's a little dusty, but you get the idea. I'm asking $90 shipped for this. The mounting screws and weather stripping for the front of the lower airbox are included, just not pictured. SOLD
Next up are a couple of motor mounts. The one on the right has a poly motor mount already installed (used for ~12k miles) and the other has a stock rubber mount. Asking $60 shipped for both. SOLD



Last, but not least is a used slave cylinder ('01'-02 model for those that care). I had it on my car for ~20k miles or so. It does not work anymore, but I know some of you guys like using the snap connection to ease the pain of bleeding the hydraulics so... Asking $30 shipped.


PM me if you're interested in any of this stuff. Any prices seem unreasonable, shoot me an offer.




It's a little dusty, but you get the idea. I'm asking $90 shipped for this. The mounting screws and weather stripping for the front of the lower airbox are included, just not pictured. SOLD
Next up are a couple of motor mounts. The one on the right has a poly motor mount already installed (used for ~12k miles) and the other has a stock rubber mount. Asking $60 shipped for both. SOLD



Last, but not least is a used slave cylinder ('01'-02 model for those that care). I had it on my car for ~20k miles or so. It does not work anymore, but I know some of you guys like using the snap connection to ease the pain of bleeding the hydraulics so... Asking $30 shipped.


PM me if you're interested in any of this stuff. Any prices seem unreasonable, shoot me an offer.
Last edited by Krab; Jul 7, 2008 at 05:49 PM.

