Midwestern Members IA, IL, IN , KY, MI, MN, MO, NE, OH, WI, KS, OK

Another Hall's deal!!!

Thread Tools
 
Search this Thread
 
Old Aug 16, 2008 | 09:24 PM
  #2381  
Juiced2000SS's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2005
Posts: 1,237
Likes: 0
From: Fort Wayne, IN
Default

Originally Posted by Black02SS
Yours is the best looking SS around IMO.
It's like I always say Chad. I'd rather look good and loose than look bad and win lol. Some forget, and some don't know I only did the engine stuff because it broke. I wasn't planning on doing half the stuff I did.
Reply
Old Aug 16, 2008 | 09:36 PM
  #2382  
Starfire1's Avatar
Teching In
 
Joined: Aug 2005
Posts: 47
Likes: 0
Default

Originally Posted by Juiced2000SS
Don't get mad at me cause no one believes you when you lie. Sorry. I'm not going to waste time racing a car 2 sec faster than mine. There's always someone faster. Oh yeah I forgot, when you were here I had my Grand Prix up there. Wife too. We didn't even drive the SS. I would love to know who you actually saw lol. I rode with the guy in the black C6 convertible.
I guess if it wasnt you then thats my bad.
It was 2 cars looked like your sig pic and both had the same or very similar rims.

Also how can his car be 2 seconds faster than your heads, cam, converter, sprayed car?
Reply
Old Aug 16, 2008 | 09:39 PM
  #2383  
Juiced2000SS's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2005
Posts: 1,237
Likes: 0
From: Fort Wayne, IN
Default

Originally Posted by Starfire1
I guess if it wasnt you then thats my bad.
It was 2 cars looked like your sig pic and both had the same or very similar rims.

Also how can his car be 2 seconds faster than your heads, cam, converter, sprayed car?
Nitrous not been installed yet lol. As said above I wasn't even planning on doing more than bolt on's but I had an engine issue with only 29k on it and had to tear it down. So I figured might as well put some crap on it. I've never cared that much. I had just remembered that the wife and I were up there in her car lol. Otherwise you had me thinking "did I do that?"
Reply
Old Aug 16, 2008 | 10:21 PM
  #2384  
JPH's Avatar
JPH
TECH Junkie
15 Year Member
iTrader: (2)
 
Joined: Jan 2006
Posts: 3,776
Likes: 0
From: Fort Wayne, IN
Default

Originally Posted by Starfire1
I guess if it wasnt you then thats my bad.
It was 2 cars looked like your sig pic and both had the same or very similar rims.

Also how can his car be 2 seconds faster than your heads, cam, converter, sprayed car?
Totally different cars/combos. Also different goals. Not every car performs like the INTERNET says it should.
Reply
Old Aug 16, 2008 | 10:22 PM
  #2385  
JPH's Avatar
JPH
TECH Junkie
15 Year Member
iTrader: (2)
 
Joined: Jan 2006
Posts: 3,776
Likes: 0
From: Fort Wayne, IN
Default

Originally Posted by Black02SS
Yours is the best looking SS around IMO.
In deed!
Reply
Old Aug 16, 2008 | 10:26 PM
  #2386  
JPH's Avatar
JPH
TECH Junkie
15 Year Member
iTrader: (2)
 
Joined: Jan 2006
Posts: 3,776
Likes: 0
From: Fort Wayne, IN
Default

Originally Posted by Starfire1
Ok lets put it on KILL and see what it does.
I think I know tis guys engine combo, and know people who have watched this car race at Oceola.
Reply
Old Aug 16, 2008 | 10:30 PM
  #2387  
Black02SS's Avatar
TECH Junkie
iTrader: (36)
 
Joined: Oct 2002
Posts: 3,291
Likes: 1
From: Kokomo, IN
Default

Engine combo is a built 355 with a 200+ shot of spray.... Or so I've heard..... How odd.
Reply
Old Aug 16, 2008 | 11:37 PM
  #2388  
Starfire1's Avatar
Teching In
 
Joined: Aug 2005
Posts: 47
Likes: 0
Default

Originally Posted by JPH
Totally different cars/combos. Also different goals. Not every car performs like the INTERNET says it should.
Yeah different cars/combos. Cam converter heads tune and spray etc on a LS1 is not 2 seconds slower I dont care what the goals may be
I have no idea what the INTERNET says it should run.
Reply
Old Aug 16, 2008 | 11:43 PM
  #2389  
Starfire1's Avatar
Teching In
 
Joined: Aug 2005
Posts: 47
Likes: 0
Default

Originally Posted by Black02SS
Engine combo is a built 355 with a 200+ shot of spray.... Or so I've heard..... How odd.
Yeah its built, right down to the stock heads.

And all BS aside what does it matter what he has done to the car or what it runs?

Its not like he can get a race now anyway. Unless someone THINKS they have a real time on the car and have it covered.

Last edited by Starfire1; Aug 16, 2008 at 11:57 PM.
Reply
Old Aug 17, 2008 | 12:02 AM
  #2390  
SDB's Avatar
SDB
10 Second Club
iTrader: (7)
 
Joined: Mar 2003
Posts: 2,327
Likes: 2
Default

Boats and hoes...boats and hoes...
Reply
Old Aug 17, 2008 | 12:05 AM
  #2391  
Black02SS's Avatar
TECH Junkie
iTrader: (36)
 
Joined: Oct 2002
Posts: 3,291
Likes: 1
From: Kokomo, IN
Default

Originally Posted by Starfire1
Yeah its built, right down to the stock heads.

And all BS aside what does it matter what he has done to the car or what it runs?

Its not like he can get a race now anyway. Unless someone THINKS they have a real time on the car and have it covered.
I was incorrect. Looks like 383.

Originally Posted by kline454
Im running a 383 11.7cr cc306 le2 heads,srp forged pistions, egale H-beam rods and 4340 forged crank. 2bolt block with arp studs, Last year i was spraying a 100shot i want more but dont want to break the block how much more can i go??
http://www.camaroz28.com/forums/show...light=kline454

Originally Posted by kline454
400shot sounds good to me.lol well i think im stepping up to a 250.
Originally Posted by kline454
383 head gasket problems with nitrous
there leaking on cly. 7-8, i was thinking about going with the 1074 gaskets but would lose compression so im looking at http://store.summitracing.com/partde...T&autoview=sku has anyone tryed these??
Reply
Old Aug 17, 2008 | 12:12 AM
  #2392  
Starfire1's Avatar
Teching In
 
Joined: Aug 2005
Posts: 47
Likes: 0
Default

cc306 Le2 heads are stock on something right?
Reply
Old Aug 17, 2008 | 12:18 AM
  #2393  
Starfire1's Avatar
Teching In
 
Joined: Aug 2005
Posts: 47
Likes: 0
Default

Originally Posted by SDB
Boats and hoes...boats and hoes...
Boats and hoes would be alot more fun than street racing has become.
Reply
Old Aug 17, 2008 | 04:41 AM
  #2394  
SS1875's Avatar
11 Second Club
iTrader: (34)
 
Joined: Feb 2005
Posts: 3,158
Likes: 0
From: Ft. Wayne, Indiana
Default

Thanks JPH and Brad for all the hard work, I think it turned out great considering
Reply
Old Aug 17, 2008 | 10:44 AM
  #2395  
NASTYTRANSAM's Avatar
11 Second Club
iTrader: (12)
 
Joined: Nov 2005
Posts: 636
Likes: 0
From: Fort Wayne, Indiana
Default

All I know is may car runs 10s on the street on street tires and 11.9s at the track with slicks...... Or it at least sounds like its doing it

What if I only had nitrous
Reply
Old Aug 17, 2008 | 11:35 AM
  #2396  
JPH's Avatar
JPH
TECH Junkie
15 Year Member
iTrader: (2)
 
Joined: Jan 2006
Posts: 3,776
Likes: 0
From: Fort Wayne, IN
Default

Originally Posted by SS1875
Thanks JPH and Brad for all the hard work, I think it turned out great considering
No problem D.
Reply
Old Aug 17, 2008 | 12:14 PM
  #2397  
ryanisl33t's Avatar
On The Tree
iTrader: (1)
 
Joined: Mar 2007
Posts: 154
Likes: 0
Default

Originally Posted by SDB
Boats and hoes...boats and hoes...
Barbara Walters, Oprah, your wife. You gotta **** one, kill one, and marry one, go!
Reply
Old Aug 17, 2008 | 12:14 PM
  #2398  
kline454's Avatar
On The Tree
iTrader: (1)
 
Joined: Jan 2007
Posts: 145
Likes: 0
Default

Originally Posted by Black02SS
That motor let go at the start of this year, (witch i said before) and have pics, Its now a stock short block on a small shot with some of the parts that i could reuse off the 383, but thanks for trying to bust my car out again..
Reply
Old Aug 17, 2008 | 01:58 PM
  #2399  
JPH's Avatar
JPH
TECH Junkie
15 Year Member
iTrader: (2)
 
Joined: Jan 2006
Posts: 3,776
Likes: 0
From: Fort Wayne, IN
Default

Originally Posted by kline454
That motor let go at the start of this year, (witch i said before) and have pics, Its now a stock short block on a small shot with some of the parts that i could reuse off the 383, but thanks for trying to bust my car out again..
Hey I got a C6 vette with cam/headers I want you to race on the street, MOTOR/MOTOR? Are you interested?
Reply
Old Aug 17, 2008 | 02:34 PM
  #2400  
kline454's Avatar
On The Tree
iTrader: (1)
 
Joined: Jan 2007
Posts: 145
Likes: 0
Default

Originally Posted by JPH
Hey I got a C6 vette with cam/headers I want you to race on the street, MOTOR/MOTOR? Are you interested?
yea ill race your c6? On the street from a dig but not on motor..My car is NOT a motor car. So put a kit on this ls? and drag my junk lt1. My motor is not fresh its a old worn out stock short block and is going slower everytime i take it to the track.
Reply



All times are GMT -5. The time now is 12:35 PM.