can i get a run down of the different plate systems out there ? dont need a whole kit, just a conversion from single wet nozzle to a plate...thanx

 

Nitrous Outlet LS1 Plate
NOS LS1 Plate
HSW LS1 Plate (not sure if it is for sale yet)
Nitrous Direct LS1 Plate (coming soon)

 

you have any pics or specific info on them ? this post was kinda directed toward the sponsors...thanx for the info

 

Yes, watch for a soon to be released plate kit from Nitrous Direct, for the ls1/ls6 platform. It will be like our dual/single stage LS2 plate kit. Also, possibly another new kit concerning the plate.
Here's the ls2 dual stage kit with quad 400hp pro noids. A nice kit for sure.

Robert

 

I am sure they will be here soon

Pic of Daves plate




The NOS plate instructions (which are VERY well written with Pictures) can be DL ed at the NOS site.
NOS Plate Intructions

 

what does a plate like that go for ?

 

Our complete plate kit with NXs New Lightning solenoids is 650.00.
Dave

 

I want that Nitrous outlet kit I just want to make my own lines to hide it just a little but I still like it s is.

 

What is used to make up for the extra distance in the throttle cable?

 

A throttle bracket extention. Comes with the kit.
Dave

 

doesn't come with the cold fusion kit however.

 

that's kinda dumb, maybe they should rethink their kit

 

Ahhhhh all they have out is the ls2 plate kit. I'm pretty sure they don't need a throttle cable extension with it since LS2's don't use a throttle cable but all you guys already know that I'm sure.

 

it can still be used on a 90/90 setup...maybe they should add that as an option

 

check this out it has the 360' spray pattern and from what i hear is going to be very affordable for the conversion.

https://ls1tech.com/forums/nitrous-oxide/516925-sneak-peak-new-hsw-plate-kit.html

 

that is badass but i dont have a 90mm intake and probably couldnt afford it anyway

 

they are being made for the ls6 intake as well and maybe matt could chime in and give us some prices cause from what i understand they are going to be cheap

 

that'd be cool, but cheap is a relative term............

 

He already has a wet nozzle kit, all he would need is the conversion Plate for $225 and maybe some hoses I believe???

I have an extra throttle extension I did not need it with the ETC.

 

Seemingly the HSW plate kit is going to be cheaper than all the others...which is cool to say the least.