Diablo prg 99-02 f-body $250, 3 BAR FAST MAP & harnss $100, Wisco bst pistons

 
Thread Tools
 
Search this Thread
 
Old Nov 3, 2008 | 03:09 PM
  #1  
GTFORMULA's Avatar
Thread Starter
TECH Resident
iTrader: (94)
 
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Default Diablo prg 99-02 f-body $250, 3 BAR FAST MAP & harnss $100, Wisco bst pistons

Diablo sport power tuner for 99-02 f-bodys was put back to stock and will tune your car $225 shipped SOLD

Fast 3 bar map and harness new in box $100 shipped

Wisco boost pistons, #K392FS 4.00 bore, 3.622 strock, 6.125 rod. Some skirt wear but should be ok they have 5,000 miles and come with the used total seal gapless rings. Come with pins. One lock is missing and can be bought from wisco. Not coated skirts older design.
http://www.wiseco.com/Catalogs/Automotive/Chevrolet.pdf
$200 SHIPPED









325-25-19 goodyear 2006 Z06 rear tires have low tread and would last a couple thousand miles. $200 shipped

Last edited by GTFORMULA; Nov 10, 2008 at 05:42 PM.
Old Nov 4, 2008 | 02:37 PM
  #2  
GTFORMULA's Avatar
Thread Starter
TECH Resident
iTrader: (94)
 
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Default

to the top
Old Nov 7, 2008 | 04:23 AM
  #3  
BROLLN's Avatar
Teching In
iTrader: (5)
 
Joined: Sep 2006
Posts: 45
Likes: 0
From: Ohio
Default

PM'd about the tuner
Old Nov 9, 2008 | 08:34 AM
  #4  
GTFORMULA's Avatar
Thread Starter
TECH Resident
iTrader: (94)
 
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Default

Tuner is sold. To the top.
Old Nov 9, 2008 | 11:29 AM
  #5  
bravolistick's Avatar
On The Tree
 
Joined: Sep 2008
Posts: 159
Likes: 0
From: WHERE UNCLE SAM SAYS
Default

PM sent....
Old Nov 10, 2008 | 08:53 AM
  #6  
GTFORMULA's Avatar
Thread Starter
TECH Resident
iTrader: (94)
 
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Default

to the top
Old Nov 10, 2008 | 10:33 AM
  #7  
bravolistick's Avatar
On The Tree
 
Joined: Sep 2008
Posts: 159
Likes: 0
From: WHERE UNCLE SAM SAYS
Default

could i get sum pix of them ... i need to figure out what rods these will work with as well.. if there in good condition .. im game
Old Nov 10, 2008 | 11:56 AM
  #8  
GTFORMULA's Avatar
Thread Starter
TECH Resident
iTrader: (94)
 
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Default

The specs are in the post. 6.125 rod. I will try to get some pics tonight. thanks
Old Nov 10, 2008 | 05:44 PM
  #9  
GTFORMULA's Avatar
Thread Starter
TECH Resident
iTrader: (94)
 
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Default

Piston pics added. My camera cant take close up pics but the pistons are in good shape just a little skirt wear. There is only one lock missing but that can be bought from a machine shop or Wisco.

For $200 shipped you cant go wrong.
Old Dec 3, 2008 | 10:11 PM
  #10  
Wicked 1's Avatar
10 Second Club
iTrader: (30)
 
Joined: Feb 2003
Posts: 251
Likes: 0
From: Cimarron KS
Default

3 bar For $75 00 shipped i will take It pm me your paypal

Last edited by Wicked 1; Dec 5, 2008 at 03:35 PM.
 




All times are GMT -5. The time now is 09:13 PM.