I have a FMS T56 that I have been told will handle "alot" of power by Alan Furtal himself. I don't know what has been done but it is one of his better built units. I never had a problem with it shifting at any RMP. I have swapped to a 350 so I have some parts to go with it.

Trans. (of course) cross member and mount, torque arm mount minus the polly. middle, I don't know the name for this part but its the actual piece that attached to the clutch pedal and moved the fluid to the slave cylinder, and a pro 5.0 shifter. I am asking $1700 for all of that plus shipping.

I also have a set of 98 WS6 wheels that are very nice with minimal scratching on them. They have nittos on the back that are slick and some worn out street tires up front but the rims look like chrome when clean. I am asking $600 plus shipping for those.

I also have a Harris speed works wet nitrous kit that was on an F-body. It comes with all braided lines necessary, the 2 solenoids, some half *** wiring the previous owner had on it (that is the reason I took it off), a bottle with brackets, and the fluted nozzle with a 150 shot set up in it. All this for $300 plus shipping.


As far as trades......I am looking for some 15x10 with 7.5" backspacing ProStars, some ls7 lifters, some 325x50x15 drag radials with good life on them, and other various LS stuff. Pm me with what you got and we can work something out

Thanks for looking. Alex.

 

how many miles since the rebuild?

 

I wish I could answer that. It was sold to a guy who didn't put it in, then sold to the previous owner who put it in my car and I don't know where the mileage was when he put it in. I know its not over 20K for sure.

 

Would you sell the pro 5.0 seperate?

 

I would like to keep everything together for the time to see if someone needs these parts for a swap. If not, you are first on the list.

 

Turns out I will also trade for a 9" center section with 35 spline spool or locker with the heavy duty center support and either 3.90, 4.11, or 4.30 gears.

Mine is going and rather than rebuild it I might as well see if someone here wants a trade, right?

 

Bump for the night owls.

 

ttt......

Prices are negotiable here folks.

 

Never mind about the 9" chunk. I just found out I have had 4.11's in there all along.

 

Good morning. Please feel free to make offers. These parts have to go soon.

 

Anyone????

 

The Trans is pending sale but everything else is still available. I have pics of the wheels now.

 

It has come to my attention that these items haven't sold due to the lack of pics. I didn't realize it at the time that some would see this as a possible scam. I assure you, I am not one of those people. Here are the shots taken today of the parts I have. Added to this list is a set of US gears 4.11 gears for a 9 inch.
I am asking $100 + shipping for the gears.

 

Trans sold All else is still available.

 

I now have a hooker aerochamber muffler with magnaflow tips welded on it for sale for $100 plus shipping if any one wants that too.

 

This stuff is taking up space here guys, make me an offer.

 

Bump for the week.