T-56 swap, Cams, Blower, LT's
Thread Starter
11 Second Truck Club
iTrader: (17)
Joined: Oct 2007
Posts: 93
Likes: 0
From: Princeton WV
Complete Whipple Supercharger, fits 99-up Chevy/GMC.... truck/suv...4.8/5.3/6.0....... could also be used on LS1/LS2 in custom applications.... includes several upper pulleys, belts, oil, electronics, has approx. 7k miles..... $2,000 +s/h
Thunder Racing....... LS2 Cheater cam, new in the plastic...... $360 shipped
Thunder Racing....... LS2 Cheater cam, new in the plastic...... $360 shipped
Last edited by sprayinLS1s; Dec 26, 2008 at 05:11 AM.
Trending Topics
Thread Starter
11 Second Truck Club
iTrader: (17)
Joined: Oct 2007
Posts: 93
Likes: 0
From: Princeton WV
car and truck motors are same design with very few differences, depending on the vehicle your putting it on, it may take a few modifications or alot, but yes it will bolt on an LS1, i actually had an LS1 shortblock with 6.0 truck heads in my silverado with this blower on it, max power will depend on many things, this is the same blower they use in the kits for the lightnings, it can be pully'd for up to 25psi on a lightning, the cam, heads, and displacement will play a very large part in max power, the amount of resistance the motor has will affect how much boost shows, free breathing motors will show less boost but make more power because their is less resistance which means the blower is making less pressure but moving the same amount of air....... all things being ideal, it should easily be able to make over 700 flywheel
Last edited by sprayinLS1s; Nov 30, 2008 at 09:32 PM.
Thread Starter
11 Second Truck Club
iTrader: (17)
Joined: Oct 2007
Posts: 93
Likes: 0
From: Princeton WV
parts i have that would work well for a silverado, either 2wd or 4wd are: TCI 3k stall, LS2 cheater cam, ported and polished TB, 2.3 whipple supercharger, prof. prod. polished aluminum intake / TB / fuel rails (may require modifications to clear water pump depending on truck)




