-Used MS3 Cam (9K Miles)(237/242 .603/.609" 113 LSA)
There is a SLIGHT blemish on one of the lobes (see pic), but it won't affect anything. I just figured I'd point it out so the buyer doesn't freak out when they see it, LOL - PRICE REDUCED! $275 shipped
MS3 Cam Pic 1
MS3 Cam Pic 2
MS3 Cam Pic 3

-Used 28# Stock Injectors - 29K Miles (off 2001 SS) - $85 shipped
No pics.... they're INJECTORS!

-Used Cloyes Single Timing set with Rolon Chain (~9K miles) - PRICE REDUCED! $50 shipped
(this is a set that came with the car when I bought it. It looks to be a cam sprocket from the adjustable timing set, but with a crank sprocket from the stock replacement set.... So that makes it non adjustable with the single keyway crank sprocket)
Cloyes Pic 1
Cloyes Pic 2
Cloyes Pic 3

-(1) Stock Axle (29K miles) - $40 shipped

- Pair of Stock LCA's - $25 shipped

-Stock Flywheel - $70 shipped

-Stock Torque Arm - $35 shipped

-Stock 3 series/4 channel 10bolt (3.42's) - $200 +shipping

-Used Yella Terra 1.7 LS1 Rockers with pedestals (9K miles)(non ultra-lites) - $300 shipped SOLD!!
YT 1.7's Pic 1
YT 1.7's Pic 2
YT 1.7's Pic 3

-Stock Clutch Master Cyl. (no reservoir or line) - $25 shipped SOLD!!
Clutch Master Cyl Pic 1

-Stock Hurst Shifter w/Pro 5.0 stick - $25 shipped SOLD!!
Shifter Pic 1

-Used Thunder Racing 7.400" (.080") Hardened Pushrods (9K miles) - $75 shipped SOLD!!
Pushrods Pic 1

-NIB TSP Ported LS6 Oil Pump - $130 shipped SOLD!!
No pics.... it's a brand spankin' new oil pump!

Thanks!!

Brian

 

Morning bump!

 

pm sent??

 

All PM's replied to.

Lots of interest.... but still no payments!

 

sending pm

 

PM sent

 

All PM's replied to.


Thanks!!
Brian

 

The oil pump has been sold.

 

Bump!!..... after a horrible, horrible Packers loss.

 

I know I can't believe those interceptions

 

In what condition is the 10 bolt.

 

Assuming rockers are for LS1 right? Pics hard to tell, but do not see offset intake rocker for my 92's, so.....

 

Well, there's ~29K miles on it.... it never whined, howled, grinded, or clunked or anything and worked perfectly fine until the day I replaced it with a 9". It's been sitting in my garage since last spring. It's a complete rear end, ready to bolt in. You'll need axles, backing plates, and fluid and you're ready to rock.

Yes, they are LS1 rockers... sorry for not specifying.

 

Bump!

 

Got the parts today.

Bump for an honest seller.

 

Good to hear.... Thanks!

 

Bump!

 

do you still have the rockers? I PM'd you a while ago, just let me know

 

PM sent back again!

Thanks!
Brian

 

rockers are mine