I have a Fast 78 that's been hogged out to 85mm. It has a PP 85mm throttle body. The Wilson has been sanded off and the intake is painted black.

Made 463 with this on my head cam LS1

$500 Plus shipping SOLD
Thunder Racing catch can in the pic is also for sale - $75 shipped to the lower 48SOLD

 

How much for just the TB?

 

I'd like to keep them together for now, if it doesn't work out, I'll let you know...

 

I might take the intake if Pwebbz28 takes the TB. Name your prices on them? Who ported the intake?

 

The intake is not ported, it was "opened" up to 85mm. There is a thread on here about doing it. I did that part of it.

Here it is...
https://ls1tech.com/forums/generatio...5-85-pics.html

I'll figure out a price for the two of them. If I could sell them both I'd split em up.

 

Just now really thing about it, I dont know if I would gain from an 85mm intake. I have a Shaner S3 and spraying with the 78mm HSW plate; the plate would pretty much restrict it back to a 78mm. But I guess if the price is right, I cant go wrong even using it that way. Hmmm...

 

You will gain a little with the fast 78 over a ls6 intake. I ran mine with a fast 78 and a stock ported T.B. and it gained a little over the ls6 intake so the 78mm nitrous plate wont hurt too bad. You might as well get the intake and the T.B. though if not you will have to run a different gasket to get it to seal.

 

If I used the 85mm TB, then wouldnt I have a big lip from the tb to nitrous plate disrupting the airflow?

 

sent pm

 

If you can find someone who wants an LS6 With Ported TB for the 350 mark, I will buy this! but I havent found anyone yet....

 

Sale pending