redid list added alot of stuff

IF YOU ARE USING PAYPAL ADD THE 3%

I have a set of 6.0 manifolds no EGR provisions need to sell. I also have the Flanges used for the turbo kit guys that need to go too flanges are new manifolds used.

02 extensions 24" long in great shape.

25 shipped 02 ext.
65 shipped manifolds
30 shipped flanges SOLD TO LS1Camaro320

all for a 100 shipped or flanges and manifolds for 80 shipped.

Bill

Flange part numbers are flngcd, flngcp i just looked at them and they do not match up to the manifolds.


- Wiseco boost pistons K392A3 -25cc 4.030bore 1.3045comp. ht. $500 shipped
- Mahle rings Part # 4035MS 1/16,1/16,3/16 standard rings 4.030" + .005" $100 shipped
$550 shipped for the set above SOLD TO TURBO CUTLASS
- Hypertech Thermostat $20 shipped sold to the beast
- Rollmaster double roller timing chain $100 shipped SOLD TO TURBO CUTLASS
- Cam Motion custom F/I cam .588 .5X4 (can't read) 232 226 on a 118 Center $300 shipped SOLD TO TURBO CUTLASS
- ATI balancer used no A/C pulley Don't know part number but it is a steel hub 6.8O.D. which is 10% underdrive. $200 shipped SOLD TO TURBO CUTLASS
- Truck coils with brackets used $125 shipped SOLD to JimmyP
- Front cover $35 shipped sold rat496boy
- Rear cover $35 shipped sold rat496boy
- Stock throttle body with all sensors 02 model $65 shipped SOLD enginesong
- Stock washer jug $20 shipped
- Patriot 6.0 heads with dual springs and Tit retainers used 10k $700 shipped sold to roscoe545
- Stock crank Beaded and in a bag $125 shipped
- 6.0 Block hot tanked $300 plus shipping SOLD TO 408Z28
- Snow performance meth kit Stage 2 used $250 shipped sold to the beast
- Comp Cams lifters used about a 100 miles $125 shipped
- Comp Cams 7955 7.400" .080" pushrods used 5k $70 shipped SOLD TO TURBO CUTLASS
- LS6 Oil pump used 10k $70 shipped
- Torquer V2 cam on a 113 LSA 595 598 used 10k $225 shipped
- S475 turbo Borg Warner New never mounted T6 flange $550 shipped
- Ebay turbo kit new never mounted $600 shipped JUST HOT PARTS
- Stock 02 4l60e needs rebuild $150 plus shipping
- Smokin'hawk alt relocation bracket $65 shipped sold Jay Johnson
- Eagle H-beam rods used 10k on them crs6125b3d $250 shipped SOLD SLOW Z28

If you want multiple things or everything let me know and we can work out a good price. All this must go i am adopting my two niece's so i need the cash and sooner than later. I will not give it away so insulting offers will be ignored.

 

rest of the stuff

 

Can you post up pictures of the flanges again? Also can you measure the thickness and inner diameter of the them? One more thing, are the flanges stainless or mild steel? Thanks.

 

I'm interested in the 6.0 block, I presume iron LQ4/9? Send some pictures to unit291@gmail and if I could get a shiping quote to northwest Florida, 32548.

 

is the ls6 oil pump ported?

 

Inner diameter is 2.25 thickness is 3/8 and i believe they are steel.

I will get pics out in a bit i will just post them up here and your email.

I want to say yes but i just do not remember sorry.

 

More pictures

 

I'll take the flanges. PM me your paypal address.

 

Sorry dreamls1 already sent me payment before you posted this

 

Alright, thanks anyways.

 

sent $ for the rods

 

rods and coils sent out a hour ago

 

everything was shipped out either friday or saturday to those who i have received payment

 

bump to the top buy more

 

specs on heads?

 

Patriot Performance
NEW GM LS (LQ9) Castings
Technical Specs:

Combustion Chamber: 72cc
Intake Runner: 227cc
Exhaust Runner: 70cc
Intake Valve: 2.02-or-208"
Exhaust Valve: 1.57-or-160"
Max. Valve Spring Lift: 0.650"
Spring Pressure Closed: 135 lbs. @ 1.800"
Spring Pressure Open: 375 lbs. @ 1.090"
Retainer Material: Titanium
Valve Seal Material: Viton
Valve Guide Material: Manganese Bronze
Valve Job: 5-angle

bought them used and never got to get them on

 

If you still have the Wiseco pistons, I'm interested if they'll work on a 4" stroke.

Arnel

 

PM'd you on the Cam and Springs/Retainers.

 

pistons gone and shipped. Pm sent on cam

 

bump almost all gone