403ci LS2 comlete engine with 6-Speed Trans!!! FOR SALE!!

 
Thread Tools
 
Search this Thread
 
Old Nov 27, 2008 | 11:27 PM
  #1  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default 403ci LS2 complete engine with 6-Speed Trans!!! FOR SALE!!

Selling my 403ci. LS2 with 6-speed trans complete minus engine harness and pcm. Wanting to go down grade. Never been dynoed so I do not have any #'s. I think the compression ratio was 11.1 to 1 don't hold me to that. Car has not been ran hard, never raced. It's in my convertible. I built the motor just to build it pretty much

Engine 403ci. LS2 aluminum block only has roughly 400-500 miles on it. Still in car, can hear run.
all accesories. minus ac compressor
All Sensors
K1 Crankshaft (Speed Inc.)
Diamond Pistons Flat top -2cc Valve Relief 1.5mm Top Ring, 3.0mm Oil Ring(Speed Inc.)
Compstar Rods with ARP 2000 Rod Bolts 6.125" (Speed Inc.)
TR Camshaft 248/254 614/620 110 lsa
LS7 Lifters
TSP Pushrods
Clevitte Rod Bearings
Patriot Performance Dual Valve Springs/ Retainers .650 lift
Stock Rockers
Stock 243 LS6 Heads
SLP Oil Pump
ASP Underdrive Pulley / Alt. Pulley
MSD Plug Wires
Prothane Motor Mounts

Intake/Fuel
Stock LS6 Intake
Stock TB
42lb Green top injectors
Nasty Performance 3/8" Polished Fuel Rails
1 3/4" Pacesetter Longtubes & O2 Sensors
Aeromotive Fuel Pressure Regulator with Gauge

Trans.
T-56
Centerforce Dual Friction Clutch
B&M Short Throw Shifter


$6,800.00 + shipping / Pick up also available / Reasonable offers considered.
I can also accept Credit Cards through my business.
Have any questons please feel free to pm me or call me (765)265-1038
Thanks, Joey

Last edited by 765joey; Dec 6, 2008 at 01:46 AM. Reason: Forgot to add the LS7 Lifters
Old Nov 27, 2008 | 11:50 PM
  #2  
LT1Formula007's Avatar
10 Second Club
iTrader: (66)
 
Joined: Mar 2007
Posts: 1,378
Likes: 0
From: Indianapolis, IN
Default

I noticed you had stock ls6 heads on it! Did you have them ported or any work at all done to them?
Also is $7100 your bottom dollar?
I see also that you only have 400-500 miles on it. That makes me wonder exactly why your selling it so soon. Interested in this... But would like to know a little more about it. And did you build it or a shop build it??? Sorry for so many questions.

James

PM me with details if you'd like!
Old Nov 28, 2008 | 10:37 AM
  #3  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

PM Sent.
Old Nov 28, 2008 | 08:47 PM
  #4  
LT1Formula007's Avatar
10 Second Club
iTrader: (66)
 
Joined: Mar 2007
Posts: 1,378
Likes: 0
From: Indianapolis, IN
Default

Got it!
I'm thinking about it now!
Old Nov 28, 2008 | 08:52 PM
  #5  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

Sounds good. You can call me. I'll be glad answer any questions or concerns you may have.

765-265-1038

Thanks, Joey
Old Nov 29, 2008 | 08:27 AM
  #6  
Black FormulaLs1's Avatar
12 Second Club
iTrader: (10)
 
Joined: Jul 2004
Posts: 2,089
Likes: 1
From: cape vincent NY
Default

7100 is not chump change for anybody i dont think...questions show that you are actually interested.not just whoring up the thread....bump for good deal!
Old Nov 29, 2008 | 02:41 PM
  #7  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

Thanks for the free bump...
Old Nov 29, 2008 | 10:40 PM
  #8  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

Bump... Reasonable offers considered.
Old Nov 30, 2008 | 12:12 AM
  #9  
LT1Formula007's Avatar
10 Second Club
iTrader: (66)
 
Joined: Mar 2007
Posts: 1,378
Likes: 0
From: Indianapolis, IN
Default

Might have a Trans AM, So I'm going to pass on this for now man! But thanks anyways. Also; Good Luck on the sale!
Just wanted you to know, I Don't like leaving people wondering!

James
Old Nov 30, 2008 | 12:21 AM
  #10  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

No problem. Thanks for getting back with me.

Joey
Old Nov 30, 2008 | 04:54 PM
  #11  
tilly's Avatar
TECH Apprentice
15 Year Member
iTrader: (5)
 
Joined: Apr 2006
Posts: 317
Likes: 0
From: KC:K
Default

Would you be willing to part with just the short block?
Old Nov 30, 2008 | 05:49 PM
  #12  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

PM Sent
Old Dec 1, 2008 | 12:46 AM
  #13  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

Bump...
Old Dec 1, 2008 | 06:07 PM
  #14  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

All PM's Replied..
Old Dec 1, 2008 | 10:02 PM
  #15  
68protouring454's Avatar
Teching In
iTrader: (1)
 
Joined: Mar 2006
Posts: 31
Likes: 0
Default

very interested, email me
jake@jakesrodshop.com
Old Dec 1, 2008 | 10:23 PM
  #16  
Formulized94's Avatar
TECH Enthusiast
iTrader: (68)
 
Joined: Nov 2004
Posts: 707
Likes: 0
From: Cleveland, TN
Default

any interest in trades?
Old Dec 2, 2008 | 03:34 PM
  #17  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

e-mal sent. pm sent

Thanks
Old Dec 3, 2008 | 12:18 AM
  #18  
84am's Avatar
Teching In
iTrader: (1)
 
Joined: Dec 2008
Posts: 30
Likes: 2
From: mobile, AL
Default

Are you willing to sep the motor from trany? If so how much.thnx
Old Dec 3, 2008 | 01:13 PM
  #19  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

pm sent.
Old Dec 3, 2008 | 09:15 PM
  #20  
765joey's Avatar
Thread Starter
On The Tree
iTrader: (47)
 
Joined: May 2005
Posts: 157
Likes: 0
From: Indiana
Default

Ttt...



All times are GMT -5. The time now is 12:35 AM.