ALL SOLD

I had these Arizen sport seats custom made for my car (02 Z28).
I had them covered in OEM Ebony leather to match the factory leather.
I had the center sections pleated and perforated to match OEM seats.
They are also optioned with factory seatbelt guides. Then nice thing about Arizen is they actually build a metal extension off the frame for the guides rather than just screwing theme to the upholstery like some others.
These also feature deep bolsters, and provisions for 5-pt harness.
They will include custom built seat brackets built for 4th (and I do believe 3rd gen) F-bodies.

They have only been in my car around a year and have seen less than 2k miles.

I'm a little tight in the garage, so these where the best pics I could get:



The passenger seat is literally perfect. My 110 pound wife sat in them like twice. The driver is nearly perfect, but does show some wrinkles on the outer lower bolster from getting in and out. I think that is unavoidable.

These things really look at home in 4th gens (or 3rds for that matter) and match the OEM rears perfectly.

I'm looking to go with stock Ebony Leather T/A of maybe Camaro seats. So I would like to trade these for a stock set plus cash. Stock seats taken in trade would need to be very nice (9 or 10 of 10).

Or I would be willing to sell outright.

When I had these done I was the first to option out the pleated/perforated OEM Ebony leather, so Arizen gave me a great deal ($1400).

I need to get $1000 outright, or $600 plus very nice stock fronts.SOLD

Here is Arizen's site:
http://www.arizenracingsports.com/
There are pics of very similar seats here:
http://www.arizenracingsports.com/pa...n/CTGY/CAMPICS

As you can see on the site these start at $595 each.
Extra cost options:
Deep bolsters
5pt provisions
OEM Ebony Leather
Pleating
Perforation
Seat brackets
Seat belt guide

If you are considering new... this will save you huge $.


These came out of my new project car (84 LS1 Vette).
I do know they are C5 (97-04 Corvette) seats, black, have motors switches and wiring still in-tact, seat belt receiving end and only one flaw (small rip on drivers - common - see photo).
$450 SOLD




They are in Janesville, WI 53546.
I would really like to avoid shipping, but could bolt them to a pallet for freight.


This 4L60-E came out of a project I bought (LS1 84 Vette). I took it out as I am going T56.
I was told it is an 02 w ~40 k miles.
Fluid looked good in it.
$450 SOLD



Located in 53546 if you are figuring shipping.
I will deliver to local terminal on pallet if needed, but pick up is preferred.

 

Sale pending on the Arizens

C5 seats still avail $400 if you pick them up.

4L60-E also $400 if you pick it up, or I have a pallet to ship it.

 

C5 seat info:

They are ~35 pounds each.
37'' tall x 21" wide x 26" deep (though the seat itself is 23", and I may be able to tuck the seat tracks so they package as 23").

My zip is 53546

-Shaun-

 

bump TTT

 

Wow, those seats look gorgeous in there. Bump for a great looking pair of buckets!

Mike

 

Thanks!

Offers?

 

Deal pending on the Arizens.

Still looking to sell the 4L60E and C5 seats.

 

have you went down any on that 4l60E bro? wish i could get them seats to ='( but im on a college budget..which aint much..f'in NADC gets every dime they can =p

 

went down to $400 plus ship.
I'm seeing ones needing rebuilt for that...

If you can swing both (C5 seats and trans) I'll do $750, if you cover shipping.

 

if you got them in the next couple weeks ill prob take em off your hand bro..tight on cash right now

 

if i was local i would buy those seats without a doubt. TTT for your bro

 

$400 for C5 seats

$400 for 4L60-E

 

all sold