FS: Comp Cam and Aftermarket Valvetrain +cutout
Thread Starter
TECH Fanatic
iTrader: (10)
Joined: Aug 2006
Posts: 1,490
Likes: 2
From: Detroit ROCK City
FS: Comp Cam and Aftermarket Valvetrain +cutout ***ADDED 4-1-2011 All parts (except DBW TB) off my formula ws6, kept in amazing condition and in perfect working order upon removal; car has been in storage past 3 years with little miles added but regular maintenance and checkups performed.
Ls1 coolant lines $30
LS6 DBW Throttle Body *Make offer
Ls1 fbody A/C system complete $120obo SUMMER IS COMING, BE READY WITH AN ICE COLD AC SYSTEM IN UR CAR!!!
Ls1 valley cover $35obo
If you want fast reply or for pics, hit me up via PM. Thanks
Add 3% if using paypal or send as gift.
I Had this stuff below on the car for a little over a 1000 miles. Car is not a DD and these parts have never been raced on. Everything was in perfect working order before they were taken off. All parts have reciepts from a reputatable sponsor.
Comp custom camshaft 228/232 .588/.595 110+4 (have cam card) ...SOLD
Patroit Dual Springs w/ titanium retainers and locks... SOLD
QTP stainless 3'' cutout (never welded) SOLD
7.425 Chromoly pushrod SOLD
LS6 ported oil pump with o-ring SOLD
LS2 heavy duty timing chain SOLD
All prices are negotiable and more pictures available upon request.
Paypal accepted
Thanks,
Steve
Ls1 coolant lines $30
LS6 DBW Throttle Body *Make offer
Ls1 fbody A/C system complete $120obo SUMMER IS COMING, BE READY WITH AN ICE COLD AC SYSTEM IN UR CAR!!!
Ls1 valley cover $35obo
If you want fast reply or for pics, hit me up via PM. Thanks
Add 3% if using paypal or send as gift.
I Had this stuff below on the car for a little over a 1000 miles. Car is not a DD and these parts have never been raced on. Everything was in perfect working order before they were taken off. All parts have reciepts from a reputatable sponsor.
Comp custom camshaft 228/232 .588/.595 110+4 (have cam card) ...SOLD
Patroit Dual Springs w/ titanium retainers and locks... SOLD
QTP stainless 3'' cutout (never welded) SOLD
7.425 Chromoly pushrod SOLD
LS6 ported oil pump with o-ring SOLD
LS2 heavy duty timing chain SOLD
All prices are negotiable and more pictures available upon request.
Paypal accepted
Thanks,
Steve
Last edited by Fb0dy0nly; Apr 13, 2011 at 09:14 PM.
Hey I have a 02 z06 are those pushrods going to work on my car with stock heads I think stock are 7.4 I may be interested in everything. Let me know what you want shipped to 98001 for everything and then everything but the cam and the pushrods if they aren't the right size. Oh I don't want the cutouts either.
Thread Starter
TECH Fanatic
iTrader: (10)
Joined: Aug 2006
Posts: 1,490
Likes: 2
From: Detroit ROCK City
The pushrods are fine. You can run 7.4 or 7.425 with a cam in that size range. Patrick G actually suggested them to help lower valvetrain noise. Let me get back to you on a price shipped for everything. Gotta check shipping costs.
