I have 3 sets of Jesel rockers. This does not include stands or hardware. Each set has approx. 25 hours on them. $250.
Also have a set of manley I beam rods PN 14442-8. Don't have any pics of those but can get some next week. Not sure how much time on them but no more than 1 season. $350.

 

Are the rockers adjustable?

 

Yes they are. Sorry should have mentioned that before. 1.7 ratio

 

I'm interested in a set but will have to call Jesel Monday and see what the stands will cost that you said you don't have with them and then go from there. Other than the stands what other hardware you are mentioning above is missing?

 

When you call them post up what they say or shoot me a PM. If you click this link and scroll to page 3 it has everything that is needed including part numbers.

EDIT: I forgot the link.
http://www.jeselonline.com/docs/inst.../INS-24021.pdf

 

The first picture appears that one rocker is offset like the L92 would use ? and the other is straight is that correct ? If it is I will take a set

 

Jesel normally gets anywhere from $180-$225 a stand and about $35 a bolt for the shaft bolts and $30 each for the shallow head stand bolts you also have to machine your heads to 9/16 holes for the stands. I have a set of jesels already thats how I know. Hope this helps

 

I believe the stands are $212.ea. Not sure about the part number.

No, these were used on 243 heads.

 

to the top

 

still have two sets. Let them go for $150.

 

Are these for a solid roller cam or hydraulic roller cam?

 

They could be used for both.

 

still have the rods. Let those go for $200.

 

Have one set left. any takers?

 

If pin bore is right I will take them. What is the pin (small end) bore size?

 

I want the last set. PM sent

 

Just received the rockers. They look like new. Thanks for the awesome deal and the quick shipping.