Parting out '99 Trans Am

 
Thread Tools
 
Search this Thread
 
Old Dec 7, 2008 | 03:59 PM
  #1  
kst8engineer's Avatar
Thread Starter
On The Tree
iTrader: (6)
 
Joined: Mar 2006
Posts: 192
Likes: 0
From: Kansas
Default Parting out '99 Trans Am w/ Ram Air

I'm parting out a '99 Trans Am. Pics are below. Although not all of them are shown in the pictures, I have the complete gray interior as well, so if you need an interior trim piece that isn't shown, I've probably got it.

What's already spoken for is the engine, trans, PCM, harness, front seats, console, and decklid/hatch. All airbag components are good. Both front fenders and the ram air hood are good, but all will need repainted. Ram Air hood has some knicks in the front, but are very easily repaired when painting to match your car. For whoever's interested in the hood, I can get more detailed pics of the knicks.






























Last edited by kst8engineer; Dec 7, 2008 at 04:19 PM. Reason: Added detail to subject
Old Dec 7, 2008 | 04:24 PM
  #2  
kst8engineer's Avatar
Thread Starter
On The Tree
iTrader: (6)
 
Joined: Mar 2006
Posts: 192
Likes: 0
From: Kansas
Default

Also spoken for are the brakes, master cylinder, and brake booster. I'll consider trades for LSX performance parts, and I'll ship anything.
Old Dec 7, 2008 | 04:39 PM
  #3  
DrewSG's Avatar
TECH Apprentice
15 Year Member
iTrader: (1)
 
Joined: Jul 2005
Posts: 364
Likes: 0
From: Ft. Lauderdale, FL
Default

Upper dash pad?
Old Dec 7, 2008 | 04:52 PM
  #4  
Maplered00's Avatar
Registered User
 
Joined: Dec 2008
Posts: 0
Likes: 0
Default

interested in the speakers, pm me plz
Old Dec 7, 2008 | 04:53 PM
  #5  
1000 ss's Avatar
Teching In
 
Joined: Sep 2008
Posts: 5
Likes: 0
From: utah
Default hood

how much for the hood? is there eny damage to the hood and how bad
let me know
Old Dec 7, 2008 | 04:59 PM
  #6  
cyclerage's Avatar
TECH Apprentice
iTrader: (59)
 
Joined: Jul 2004
Posts: 303
Likes: 0
From: NJ
Default

I'll take the airbox assembly, how much shipped to NJ 08879, Also prices on the tail lights, driver side ground effect,
Old Dec 7, 2008 | 05:04 PM
  #7  
kst8engineer's Avatar
Thread Starter
On The Tree
iTrader: (6)
 
Joined: Mar 2006
Posts: 192
Likes: 0
From: Kansas
Default

Originally Posted by DrewSG
Upper dash pad?
The upper dash cover was in really nice shape until I tried to remove it... It's useless now.
Old Dec 7, 2008 | 05:16 PM
  #8  
sprcoupe's Avatar
Teching In
 
Joined: Mar 2007
Posts: 0
Likes: 0
Default

where are u located? how much for rack & pinion
Old Dec 7, 2008 | 05:17 PM
  #9  
87ciz's Avatar
Teching In
iTrader: (3)
 
Joined: Feb 2006
Posts: 41
Likes: 0
From: Middletown, Ohio
Default

how much for side mirrors?
Old Dec 7, 2008 | 05:31 PM
  #10  
juniorsws6's Avatar
Teching In
 
Joined: Aug 2007
Posts: 15
Likes: 0
From: ruskin
Default

would you have a m6 crossmember or is it a A4 and if you do how much to ship it to
florida 33570 thank's
Old Dec 7, 2008 | 10:34 PM
  #11  
campbellshotrods's Avatar
On The Tree
iTrader: (1)
 
Joined: Jun 2006
Posts: 127
Likes: 0
From: Gilbert, AZ
Default

So how is the back seat? Leather of course? What could you do shipped to 85233?
Old Dec 7, 2008 | 11:37 PM
  #12  
kst8engineer's Avatar
Thread Starter
On The Tree
iTrader: (6)
 
Joined: Mar 2006
Posts: 192
Likes: 0
From: Kansas
Default

I'll charge actual shipping costs on all items (no bogus inflated costs). Whenever possible, I'll ship UPS ground. If necessary, I'll ship the big stuff via truck freight. All items are located in southeast KS and local pickup is fine.

m6 crossmember - $50 plus shipping

Ram air hood AND air box together - $500 plus shipping

Left side taillight - $45 plus shipping. A couple of the mounting screw locations are broken, but I think it could be repaired with a little creativity. Once it's installed, no damage would be visible. (right taillight has some damage to the outer lens, but I'll throw it in if you want it)

Taillight filler panel - $35 plus shipping

Right side rocker extension (ground effect) - $35 plus shipping (left side was damaged in wreck)

Back seat (grey leather) is in excellent condition - $85 plus shipping, and I'm pretty sure this could go UPS.

Right side mirror - some scratches in paint, one chip in plastic on inside edge about 3/8"x1/4" (adjacent to window), can provide pics if needed - $25 plus shipping

Steering rack / pinion - $50 plus shipping

Driver's side airbag - $40 plus shipping

Passenger side airbag - $40 plus shipping

Also have airbag sensors, etc.

T-tops - $200 plus shipping ($100 each)

I have everything necessary for a t-top conversion as well (door weatherstripping, t-top headliner, t-top weatherstripping, etc.). If anyone is interested in a package, PM me and let me know.

Hatch struts - $10 plus shipping (pair)

Hood struts - $10 plus shipping (pair)

T-top holders (mount in hatch well) - $15 plus shipping (pair)

Trans Am gauge hood / instrument panel bezel (With vent and switch) - $45 plus shipping

Headlight switch - $20 plus shipping

Climate control panel - $30 plus shipping

Door sills / rocker sills - $30 plus shipping (pair)

Dash / instrument panel IP carrier $150 plus shipping - I've shipped one of these before via UPS, and the shipping wasn't as bad as you'd think.

Instrument panel / gauge cluster, pillar trim, headliner, door panels, glove box door, etc., let me know if you're interested in something I didn't list.
Old Dec 7, 2008 | 11:42 PM
  #13  
kst8engineer's Avatar
Thread Starter
On The Tree
iTrader: (6)
 
Joined: Mar 2006
Posts: 192
Likes: 0
From: Kansas
Default

It's also got two good 16" OEM 5-spoke wheels, but I'll have to figure out a way to get them off the car without a key for the wheel locks. The guy I bought the car from forgot to give me the key... $100 plus shipping for the 2 wheels or $50 each plus shipping.
Old Dec 7, 2008 | 11:45 PM
  #14  
kst8engineer's Avatar
Thread Starter
On The Tree
iTrader: (6)
 
Joined: Mar 2006
Posts: 192
Likes: 0
From: Kansas
Default

Flowmaster crossflow muffler in stock location with the factory T/A tips welded on. $125 plus shipping for this. The intermediate pipe was cut just in front of the rear axle and has a stainless steel band clamp making the connection at this point. I'll throw in the band clamp for an easy installation.
Old Dec 7, 2008 | 11:53 PM
  #15  
kst8engineer's Avatar
Thread Starter
On The Tree
iTrader: (6)
 
Joined: Mar 2006
Posts: 192
Likes: 0
From: Kansas
Default

Stock cats / catalytic converters are also available. PM if interested.
Old Dec 8, 2008 | 01:40 AM
  #16  
azceta's Avatar
11 Second Club
15 Year Member
iTrader: (1)
 
Joined: Sep 2006
Posts: 94
Likes: 0
From: Austin TX
Default

Price on body?
Old Dec 8, 2008 | 02:19 AM
  #17  
SoutherngirlRacer88's Avatar
Registered User
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: Hammond, La
Default

Got a radio you willing to part with?
Old Dec 8, 2008 | 05:25 AM
  #18  
campbellshotrods's Avatar
On The Tree
iTrader: (1)
 
Joined: Jun 2006
Posts: 127
Likes: 0
From: Gilbert, AZ
Default

If you can get a price on shipping of the seat to 85233, I'm definitely interested. Also, still have the rear seatbelts? All my stuff was gutted.
Old Dec 8, 2008 | 07:59 AM
  #19  
oange ss's Avatar
TECH Junkie
20 Year Member
iTrader: (50)
 
Joined: Jan 2005
Posts: 3,241
Likes: 6
From: Texas
Default

frt brake calipers ?
Old Dec 8, 2008 | 09:27 AM
  #20  
kst8engineer's Avatar
Thread Starter
On The Tree
iTrader: (6)
 
Joined: Mar 2006
Posts: 192
Likes: 0
From: Kansas
Default

Originally Posted by SoutherngirlRacer88
Got a radio you willing to part with?
It's got the factory cassette stereo (Monsoon, I believe). $20 plus shipping.



All times are GMT -5. The time now is 01:05 PM.