lots of parts exhaust, valvetrain, a/c, emissions and more
lots of parts exhaust, valvetrain, a/c, emissions and more Here are some parts that I no longer have any use for. The prices are a total guess so don't be afraid to make an offer.
3" 45* exhaust tubing bends and clamps from summit xpipe kit (I only kept the xpipe)........$40
New Stainless Steel 3" band clamps 2 butt end and 2 slip fit.........................SOLD
LT1 oil filler neck without cap............................................... .................$5
1997 LT1 I pipe with cats.............................................. ......................$80
Z28 Exhaust Tips.............................................. .................................$40
LT1 exhaust manifolds......................................... ...............................SOLD
EGR............................................... .................................................. ..$15
AIR pump.............................................. ...........................................$40
1997 LT1 stock camshaft.......................................... ..........................SOLD
LT1 stock rockers, springs, retainers, 3/8'' rocker studs, 7.2" pushrods........$40
LT1 timing chain and gears............................................. .....................$15
LT1 A/C condensor......................................... ..................................$30
LT4 Valeo Pressure Plate used (SPEC 2 kit had same valeo PP painted blue) $60
2 LS1 rear rotors (no warping good condition)........................................ $40
2 LT1 front rotors (no warping good condition).......................................$ 40
New HAWK HPS rear brake pads for LT1 (I found out I had LS1 rotors)........$40
LT1 T56 complete hydraulics system (works fine no leaks)........................$50
USED torque to yield LT1 head bolts (could be used for mock up)...............Make an offer
Im sure I have more parts that I forgot but if you are looking for something just ask I have lots of odds and ends laying around.
I CAN SUPPLY PICS UPON REQUEST! ! !
3" 45* exhaust tubing bends and clamps from summit xpipe kit (I only kept the xpipe)........$40
New Stainless Steel 3" band clamps 2 butt end and 2 slip fit.........................SOLD
LT1 oil filler neck without cap............................................... .................$5
1997 LT1 I pipe with cats.............................................. ......................$80
Z28 Exhaust Tips.............................................. .................................$40
LT1 exhaust manifolds......................................... ...............................SOLD
EGR............................................... .................................................. ..$15
AIR pump.............................................. ...........................................$40
1997 LT1 stock camshaft.......................................... ..........................SOLD
LT1 stock rockers, springs, retainers, 3/8'' rocker studs, 7.2" pushrods........$40
LT1 timing chain and gears............................................. .....................$15
LT1 A/C condensor......................................... ..................................$30
LT4 Valeo Pressure Plate used (SPEC 2 kit had same valeo PP painted blue) $60
2 LS1 rear rotors (no warping good condition)........................................ $40
2 LT1 front rotors (no warping good condition).......................................$ 40
New HAWK HPS rear brake pads for LT1 (I found out I had LS1 rotors)........$40
LT1 T56 complete hydraulics system (works fine no leaks)........................$50
USED torque to yield LT1 head bolts (could be used for mock up)...............Make an offer
Im sure I have more parts that I forgot but if you are looking for something just ask I have lots of odds and ends laying around.
I CAN SUPPLY PICS UPON REQUEST! ! !
Last edited by MadMike 97 Z28; Jan 6, 2009 at 07:08 PM. Reason: added more parts
