10 bolt w/342's/girdle, 410's w/Auburn, SSRA, Spohn TA
#1
11 Second Club
Thread Starter
iTrader: (43)
10 bolt w/342's/girdle, 410's w/Auburn, SSRA, Spohn TA
*** 4th Gen F Body Liquidation Sale ***
7.5" 10 bolt rear out of my 2000 SS. It has less than 50K miles, has QUIET 342 gears and a Summit Girdle installed. It is a 3 channel housing that I converted to a 4 channel, which means it can be used in either type car. 4 channel axles will be included and 3 channel ring is still on the factory Auburn differential. It will not include brakes, brake hardware, calipers, or rotors.
$350 ~ It is still in car and I can take buyer for drive. Will be removed when sold. Must be picked up in Baltimore.
7.5" 10 bolt 410 ring & pinion gears with 2 series Auburn carrier. Gears were quiet, but it needs new pinion bearings (which I'd replace anyway on a used set)
$125 shipped/$100 cash & carry ~ it's out of car and ready to be picked up or shipped
SSRA ----- SOLD!
Spohn ------SOLD!
SLP 160 degree thermostat & housing. Still in car, which is where it's been for last 3 months/800 or so miles.
$30 shipped, $25 picked up
Can email pics of everything except rear and t-stat housing that is in car. Too damn cold too lay on ground and take pics, lol.
7.5" 10 bolt rear out of my 2000 SS. It has less than 50K miles, has QUIET 342 gears and a Summit Girdle installed. It is a 3 channel housing that I converted to a 4 channel, which means it can be used in either type car. 4 channel axles will be included and 3 channel ring is still on the factory Auburn differential. It will not include brakes, brake hardware, calipers, or rotors.
$350 ~ It is still in car and I can take buyer for drive. Will be removed when sold. Must be picked up in Baltimore.
7.5" 10 bolt 410 ring & pinion gears with 2 series Auburn carrier. Gears were quiet, but it needs new pinion bearings (which I'd replace anyway on a used set)
$125 shipped/$100 cash & carry ~ it's out of car and ready to be picked up or shipped
SSRA ----- SOLD!
Spohn ------SOLD!
SLP 160 degree thermostat & housing. Still in car, which is where it's been for last 3 months/800 or so miles.
$30 shipped, $25 picked up
Can email pics of everything except rear and t-stat housing that is in car. Too damn cold too lay on ground and take pics, lol.
Last edited by rel3rd; 01-13-2009 at 03:53 PM.
#2
Launching!
iTrader: (16)
*** 4th Gen F Body Liquidation Sale ***
7.5" 10 bolt rear out of my 2000 SS. It has less than 50K miles, has QUIET 342 gears and a Summit Girdle installed. It is a 3 channel housing that I converted to a 4 channel, which means it can be used in either type car. 4 channel axles will be included and 3 channel ring is still on the factory Auburn differential. It will not include brakes, brake hardware, calipers, or rotors.
$350 ~ It is still in car and I can take buyer for drive. Will be removed when sold. Must be picked up in Baltimore.
7.5" 10 bolt rear out of my 2000 SS. It has less than 50K miles, has QUIET 342 gears and a Summit Girdle installed. It is a 3 channel housing that I converted to a 4 channel, which means it can be used in either type car. 4 channel axles will be included and 3 channel ring is still on the factory Auburn differential. It will not include brakes, brake hardware, calipers, or rotors.
$350 ~ It is still in car and I can take buyer for drive. Will be removed when sold. Must be picked up in Baltimore.
Thanks,
Alex
#5
11 Second Club
Thread Starter
iTrader: (43)
It is red and price is non-negotiable.
It is $409 brand new (plus shipping) on Spohn website.
{$369 + $40 for driveshaft loop}
Thanks.
Last edited by rel3rd; 01-04-2009 at 01:39 PM.
Trending Topics
#9
11 Second Club
Thread Starter
iTrader: (43)
Revised price on 410's and 2 series Auburn carrier:
TORQUE ARM is SOLD!
7.5" 10 bolt 410 ring & pinion gears with 2 series Auburn carrier. Gears were quiet, but it needs new pinion bearings (which I'd replace anyway on a used set)
$125 shipped/$100 cash & carry ~ it's out of car and ready to be picked up or shipped
$125 shipped/$100 cash & carry ~ it's out of car and ready to be picked up or shipped
TORQUE ARM is SOLD!
Last edited by rel3rd; 01-13-2009 at 03:52 PM.