FS: Misc. Parts
Thread Starter
Joined: Apr 2002
Posts: 1,840
Likes: 1
From: Dallas, Tejas
FS: Misc. Parts Shipping not included, prices negociable...
Holley Universal In-Line Fuel Pump #510-12-920
80 gph @ 15 psi/67 gph @ 45 psi
480 pph @ 15 psi/402 pph @ 45 psi
5 amps @ 15 psi/8 amps @ 45 psi
Supports TBI up to 800 HP
Used few thousand miles, comes with whatever extra lines and filters I have from the truck.
$100
Stock 98-02 F-body Aluminum Driveshaft, 83k miles - SOLD!
Integrity transmission coolers inc. deep oil pan w/built in cooler lines for TH400 (must be used with shallow pan filter tube, used) - $50
Stock 98-02 F-body Starter, 83k miles, good working condition (replaced with 6.0L truck starter) - SOLD!
Stock 98-02 F-body 4L60E crossmember, 83k miles, good condition (i have another one with about the same miles) - $30 each
Stock 99 F-body 4L60E flexplate, 83k miles (also have 2 more) - $40 each
Stock 98-02 F-body 4L60E/T56 transmission mount, 83k miles - SOLD!
Stock 98-02 F-body 4L60E Tailshaft Housing, 83k miles - $25
Factory 02 F-body T56 shifter plate w/cut-n-welded stick, 23k miles - SOLD!
Factory 02 F-body T56 bell housing, 23k miles (good condition) - SOLD!
Campbell Hausfeld Gravity-Feed Spray Gun, model #DH7800, new in box - $40
93-02 F-body T-Tops w/key (Off 01 Z28, ebony plastic, factory tint) - $100 per side
Stock 99 WS6 rear springs, 83k miles - $25
Stock 99 WS6 front springs, 83k miles (one side is still on the strut) - $25
Stock 02 F-body Throttle Body, no sensors, minor inside cleaning with sandpaper - SOLD!
Holley Universal In-Line Fuel Pump #510-12-920
80 gph @ 15 psi/67 gph @ 45 psi
480 pph @ 15 psi/402 pph @ 45 psi
5 amps @ 15 psi/8 amps @ 45 psi
Supports TBI up to 800 HP
Used few thousand miles, comes with whatever extra lines and filters I have from the truck.
$100
Stock 98-02 F-body Aluminum Driveshaft, 83k miles - SOLD!
Integrity transmission coolers inc. deep oil pan w/built in cooler lines for TH400 (must be used with shallow pan filter tube, used) - $50
Stock 98-02 F-body Starter, 83k miles, good working condition (replaced with 6.0L truck starter) - SOLD!
Stock 98-02 F-body 4L60E crossmember, 83k miles, good condition (i have another one with about the same miles) - $30 each
Stock 99 F-body 4L60E flexplate, 83k miles (also have 2 more) - $40 each
Stock 98-02 F-body 4L60E/T56 transmission mount, 83k miles - SOLD!
Stock 98-02 F-body 4L60E Tailshaft Housing, 83k miles - $25
Factory 02 F-body T56 shifter plate w/cut-n-welded stick, 23k miles - SOLD!
Factory 02 F-body T56 bell housing, 23k miles (good condition) - SOLD!
Campbell Hausfeld Gravity-Feed Spray Gun, model #DH7800, new in box - $40
93-02 F-body T-Tops w/key (Off 01 Z28, ebony plastic, factory tint) - $100 per side
Stock 99 WS6 rear springs, 83k miles - $25
Stock 99 WS6 front springs, 83k miles (one side is still on the strut) - $25
Stock 02 F-body Throttle Body, no sensors, minor inside cleaning with sandpaper - SOLD!
Last edited by Dirty 30; Jan 16, 2009 at 11:43 AM.
Thread Starter
Joined: Apr 2002
Posts: 1,840
Likes: 1
From: Dallas, Tejas
No, Im running a 6.0 Truck- starter, flexplate, spacer, and a TH400 w/stall. The 6.0 flexplate is flat so it needs the spacer between it and the engine so u need the longer 6.0 starter. I had this setup in my 03 Silverado.
