Hey all,

Had these sittin in the back of the shop. They were slightly used by customers then sent back to us either because they ordered the wrong driveshaft or they decided they did not need the driveshaft. Anyways, they are now for sale.



Here is the information on each of the driveshafts...

The top one measures 42" from center of the U-joint to center of U-joint. It has the trans. yoke for a T-56 or 4L60e.

The Middle one measures 42" from center to center, does not include a trans. yoke.

The bottom one measures 41" from center to center, and has a damaged U-joint from customer removal of trans. yoke.

New these retail for 410 dollars + shipping from us, we are asking for 250 shipped for the one with the yoke, and 200 shipped for the other 2. If you have any questions, don't hesitate to shoot us a call at 260-244-4808. Thanks for looking!!!

 

what kind of power are these good for?

 

1000hp

 

I'll take The Middle one measures 42" from center to center for $200 shipped
how do you want payment?

BTW> do you know how long a stock aluminum driveshaft is? the reason I ask is I'm using one out of a A4 car now and I have a th350 and a 9" and my stock one needs to be about an inch longer

 

EgoKiller,

Just give us a call at the shop and we'll take care of payment.

As far as stock driveshaft length goes, it is 41" center to center. So the 42" would be perfect for your setup.

 

sounds good, I call in a little bit. who do I ask for?

 

Myself (Drew)

 

interested in the 41 in shaft . is it the same as a stock ls1 97 to 99 with a auto lea nth and you-joint hole size wise. i am using a 97 ls1 aluminum one now with my strange 12 bolt .Saree for the spelling have dyslexia if you can give the specks i can call strange i have a 95 ta with a 6 sped. i left my bomber for you to call me back
thank you pat

 

PM sent

 

Middle driveshaft sold (42" with u-joints)

41" and top 42" (with yoke) still available...

 

Bump for a Friday.

 

what size will owrk on a stoc k ss with a 6 speed car 01

 

PM sent

 

41" piece I want. Have a question about a yoke and u-joint I will ask you.

 

The 41" will work but you would need to do a little work to make it so. (U-joints)

PM replied, and sure...Just either give me a call at 260-244-4808 or send me a PM back.

 

drew, send you a PM.
thanks agian

 

Interested in the top d/s. I think it should suit my setup: t-56 to a Moser 12?

 

Sparkplug,

In our experiences, the best driveshaft for that setup would be the stock length driveshaft. (41")

 

Do you still have the top one available?

 

I know for sure the one on top is not still available, Its sitting under my car right now.