Fast 90mm,
It was ported by me. I took all the flashing and smoothed out the area at the injectors. I also cleaned it all out and smoothed it where it transitions to the runner. I also opened it up at the mouth. I spent alot more time than was needed to insure a great job. I am only selling it because I am going forced induction and dont think the intake is ideal to run over 20psi of boost. The intake has the FAST logo's shaved and it has been sanded smooth. I had it painted at a local body shop but the paint did not adhered all that well. although it was 2 years ago that it was painted and a magic marker would do wonders to tough it up. I tried to take some pictures of the inside but it didnt work out well. Please see the areas that the paint flaked off. The intake was dirty and I didnt wipe it off well enough, thats why there are some dull spots. The intake is drilled and tapped for a direct port. It does not come with the throttle cable bracket that is installed. It does come with either the fast bolt set or a stock bolt set. $700 plus shipping and paypal


****FUEL RAILS ARE SOLD*******
I do have a set of Professional Products "Aeromotive Style" Fuel Rails I never installed that I bought used. I would sell them for $75 plus shipping and paypal. Please notice in the pictures there are some parts of the rail that were marred during assembly.

 

Can you tell me what the fittings on the fuel rails are?

 

here is a link to a PDF file that details the fittings
http://www.professional-products.com...llus/10612.pdf

 

this is what i've been looking for. im interested, though the work computers wont let me see the pictures, I'll PM you when i get home this evening pending you still have it

 

Fuel rails are sold

 

Bumping up