JESEL Sportsman Series Shaft Mount Rockers (1.7:1)(DFW, TX)
Thread Starter
TECH Enthusiast
iTrader: (32)
Joined: Aug 2005
Posts: 638
Likes: 1
From: The great state of Tejas!
JESEL Sportsman Series Shaft Mount Rockers (1.7:1)(DFW, TX) I have a used set of Jesel Sportsman Series rockers for sale.
They are 1.7:1 ratio and are non-adjustable.
They are currently at HKE in Houston and can be verified by the owner Erik.
If you are interested, shoot me a PM or post up.
I am asking $450 plus shipping.
I am located in DFW and can ship them from here, but if needed, Im pretty sure that I can also ship them out of Houston straight to you...
Thanks,
Justin
They look just like these...
They are 1.7:1 ratio and are non-adjustable.
They are currently at HKE in Houston and can be verified by the owner Erik.
If you are interested, shoot me a PM or post up.
I am asking $450 plus shipping.
I am located in DFW and can ship them from here, but if needed, Im pretty sure that I can also ship them out of Houston straight to you...
Thanks,
Justin
They look just like these...
Thread Starter
TECH Enthusiast
iTrader: (32)
Joined: Aug 2005
Posts: 638
Likes: 1
From: The great state of Tejas!
These RR's are $1,020.99 from Jegs.
They are for Hydraulic cams only and you may have to adjust pushrod length for proper fit.
I should have pictures very soon.
These are them, as they came off my LSx motor(not sure if they fit LTx motors or not)...
http://www.jegs.com/i/Jesel/549/KSS-307070/10002/-1#
They are for Hydraulic cams only and you may have to adjust pushrod length for proper fit.
I should have pictures very soon.
These are them, as they came off my LSx motor(not sure if they fit LTx motors or not)...
http://www.jegs.com/i/Jesel/549/KSS-307070/10002/-1#
Trending Topics
No there's no way they'll fit an LT1. LT1 is GEN 1/2 family. Does it require shorter pushrods as it would be no surprise to me if it did say that shorter pushrods were necessary.
