WTB: H/C items, suspension parts, duals, tires, ect....
Thread Starter
Restricted User
iTrader: (36)
Joined: Sep 2008
Posts: 1,268
Likes: 0
From: Alliance Nebraska
WTB: H/C items, suspension parts, duals, tires, ect.... I will have my taxes on the 9th!!!!
I am looking for these items..... i am going to wait a week or two befor i purchase these items new!!! Looking to save a few bucks if i can....
25% Underdrive pulley
Lifter Trays
Pushrod Checker
Y pipe
SFC's
Good Tires for stock 16" TA wheels
PRC 5.3L Stg 2.5 heads... Purchased
Adjustable timing set Purchased
Ported oil pump Purchased
LS7 lifters Purchased
Ls6 valley cover Purchased
Lid Purchased
Dual Exhaust or catback Purchased
Trans Temp Guage 2 5/8" Purchased
Adjustable Panhard Bar Purchased
LCA's Purchased
If you have anything else you think i might be interested in let me know!
I already have:
Intake, Stall, Headers, trans cooler, plug wires, linelock, PP TB
Thanks GUYS!!!!
I am looking for these items..... i am going to wait a week or two befor i purchase these items new!!! Looking to save a few bucks if i can....
25% Underdrive pulley
Lifter Trays
Pushrod Checker
Y pipe
SFC's
Good Tires for stock 16" TA wheels
PRC 5.3L Stg 2.5 heads... Purchased
Adjustable timing set Purchased
Ported oil pump Purchased
LS7 lifters Purchased
Ls6 valley cover Purchased
Lid Purchased
Dual Exhaust or catback Purchased
Trans Temp Guage 2 5/8" Purchased
Adjustable Panhard Bar Purchased
LCA's Purchased
If you have anything else you think i might be interested in let me know!
I already have:
Intake, Stall, Headers, trans cooler, plug wires, linelock, PP TB
Thanks GUYS!!!!
Last edited by 1BAD_LS1; Jan 28, 2009 at 01:38 AM.
i have a set of tea stage 2 heads 5.3 castings that are pretty nice. all the good stuff spring etc. don't remember the exact flow numbers but i know they were in the 320cfm on the intake. i made just over 500 rwhp with these on my 383 i had. sold went with another type of set up. i also have an oil pump as well. also if you are interested i have a aluminum weiand intake that was also ported and polished and modified to a 90mm to accept a fast or other throttlebody. i have the fast throttlebody as well. just one more thing that i can think of right now is a set of jessel 1.7 shaft mounted rocker arms. i know i have some other stuff as well but i can't think of it right now. make me an offer and we can go from there. thanks.