All parts are from my 00'TA. the parts unless noted have only 18 passes on it and NO street miles at all! Only trades I'm looking for right now are around a 3600 yank or vig converter, stock TA catback let me know what you got. All items do not include shipping and some are pick up only.

Moser 9",35 spline axles, detroit locker, 4.11 gear, aluminum pinion support,lower control arm relocation brackets, Set up for LTx style brakes(if interested will swap my rear brake setup for stock LSx brake setup). Does not have TCS or ABS.This rear has about 50 passes on it and 1500 street miles. $1900sold

BMR tubular K-member, w/ upper(w/ball joints) and lower control arms(black) new price $900(PICK UP ONLY!)Package only




Qa1 "F" series coil overs w/315 springs sold

BMR th400 conversion cross member(black) had to elongate the hole to fit my car(doesn't hurt crossmember at all)sold

Spohn Chromoly Torque Arm for LT's w/ driveshaft loopand spherical joint(bought used, never installed) $425sold

BMR X-Treme rear antirollbar(will not come with chassis or rear end mounts becouse they are welded in. Can get them from BMR) $250sold

UMI double Adjustable Panhard rod and lower control arms,Black(used only 8 passes) sold

Strange rear single adjustable shocks sold

Odyssey PC-680 battery and Thunder aluminum mount, Battery has been sitting 10 months but still held charge- sold

TCI LS1 SFI flexplate sold

Autometer Sport Comp Playback 5" tach 9Krpm(owned for a few years used very little) Also have homemade mount thats included $275



Edlebrack Victor headers 1 3/4" stepped to 1 7/8"(just had recoated black) sold

Edlebrock y pipe for above headers(never used)sold

Dynomax 3" race bullets(2) w/ turndowns set up for mount to above headers-does not include O2's sold

VFN WS6 style pin on hood(bought used) already has holes for Dzus fasteners and a front mount that bolts inplace of hold down, Hood weighs only like 5#'s, In primer- $300new price(PICK UP ONLY!)MAKE OFFER!



Nasty performance sheetmetal valve covers w/Breathers for each side. sold

Morel Solid roller lifter(bought used never run, suppose to be low miles, look new)$400



Morel Hyd. roller lifter(bought used, never run, also low miles, also look like new)sold

L92 Yella Terra Rockers(new)$425




L92/L76 car intake w/sensor and gaskets(bought used,only dyno time)sold

98 Corvette "806" perimeter bolt heads w/ valve covers(like new, probably less than 2K miles) $250NEW PRICE $200





Corvette Stock LS1 balancer(used)sold

LT1 Tan leather camaro seatssold

ASP SFI 25% underdrive pulley (used for 8 passes)sold

 

would you be interested in a complete, near new LS rear brake setup, 2k miles on all.... calipers, rotors, lines.............. i would like to work some kind of a partial trade for LCAs, PHB, rear shocks............ i'm putting all aftermarket stuff in mine so if you need any other stock parts, let me know

please PM if you are interested

 

how much shipped to 42701?thanks-sent you a pm on the intake

 

Any pics of the K-member and control arms? Very interested and in GA willing to pick them up. Pics to Nighttrainrob@gmail.com Thanks

 

Extremely interested... What brand springs and did you ever get pics of these? Also, what would total be shipped to 39056? PayPal ready...

 

All PM's have been replied to.

SprayingLS1s- PM me a price you want for the brake setup. I may have something lined up local but shoot me a price just incase it doesn't pan out.

B8SMANLT1-the springs are Qa1 also. No pics yet I haven't got the front suspension off. Probably have out tomorrow. Also you are looking about $25 to ship

2000TAramAIR--Do not have suspension out of the front yet. hopefully Tomorrow and I will get the pics up.

 

replied to all PM's

 

PM Sent

 

can you send me part number on front suspension very interested

 

pics of the rear end and K-member

 

upper a-arms-AA001
lower a-arms-AA002
K-member-KM003

 

PM sent.

 

PayPal sent for QA1 Coilovers... Thanks...

 

Payment sent for battery and mount. Thanks.

 

I wish I had some money. You have a lot of random things I could use.

 

do you want a straight formula/TA exhaust or will you take WS6 exhaust? i got stock Ws6 exhaust i'll trade for the UMI rear suspension pieces.

 

I would take it , but not for $300 worth of parts. My best shot is for someone local to me so that it wouldn't have to be shipped.

 

LMK if the Rear Sway bar fall's through... Very interested

 

I will let ya know.

All PM's replied to!

 

im interested in the rear if the pending sale falls through let me know!!! im local!!!