stroker pistons
stroker pistons 300 shipped to the 48 state new in the box
Probe
14515-STD 9 Chev LS1 4.000 4.000 6.200 1.030 1.5 1.5 3.0 D Wall .250 .125 .075 .927 x 2.500 10112 Dbl Spiral Dish Top -0.150 24.7 9.26 9.10 8.79 14515-000 0
Probe
14515-STD 9 Chev LS1 4.000 4.000 6.200 1.030 1.5 1.5 3.0 D Wall .250 .125 .075 .927 x 2.500 10112 Dbl Spiral Dish Top -0.150 24.7 9.26 9.10 8.79 14515-000 0
i got this off probe wed site they are for a 4" stroke
http://www.probeindustries.com/Pisto...istonSpecs.htm
http://www.probeindustries.com/Pisto...istonSpecs.htm
http://www.probeindustries.com/Pisto...t/Chev_LS1.htm
Look at bottom of page,
conflicting info on the pistons from the mfg?
Look at bottom of page,
conflicting info on the pistons from the mfg?
Trending Topics
Same part number you have listed. I don't need pistons for a 3.900 stroke so we need to verify this. I'll call Probe but can you measure the pin height?
Calipers from the piston top to the upper side of the pin hole is fine.
Calipers from the piston top to the upper side of the pin hole is fine.