Th400 for trade

Thread Tools
 
Search this Thread
 
Old Jan 29, 2009 | 11:45 PM
  #1  
Raven02TA's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2002
Posts: 1,291
Likes: 2
From: Warrenton, va
Default Th400 for trade

What I have-

Hughes Race Prep TH400 - Reverse manual valvebody, + transbrake

Hughes 4000 Stall TQ converter

Carbon Fiber Scatter shield

Hurst 1/4 pro shifter w/transbrake button

B&M trans cooler

LoKar Chrome flex dipstik

Steel Nitrous ready driveshaft for a 9" rear with a 1350 yoke

Any and all parts to make it work in your car

--------------------------------------------------------------------------------

Want I want

T56- in very good condition with NO shifting problems.

A new better then stock clutch (not going to be racing anymore but I want it to handle my 408 on street tires)

Any and all parts I might need to make it work in my car.

I am taking a loss on this deal and would normally want cash on top of the deal but I want my car on the streets ASAP so I am willing to make a strait up trade.
Trade to be made at Glen Bernie Racing shop in md where the work will be done.

You must pay for your half of the work I will pay for mine.
Reply
Old Jan 30, 2009 | 07:16 AM
  #2  
02BLKWS6MD's Avatar
TECH Enthusiast
iTrader: (22)
 
Joined: Jun 2006
Posts: 746
Likes: 0
From: Millersville, MD
Default

I would trade you but I do my own work. Sounds like a definetly great deal. Good luck with it.
Reply
Old Jan 30, 2009 | 09:49 AM
  #3  
Floader's Avatar
TECH Apprentice
iTrader: (32)
 
Joined: May 2004
Posts: 338
Likes: 0
From: Vermont
Default

Id buy some stuff off ya if you end up parting it out.
Reply
Old Jan 30, 2009 | 09:57 AM
  #4  
CamaroRacing12's Avatar
11 Second Club
iTrader: (5)
 
Joined: Apr 2007
Posts: 3,779
Likes: 3
From: Haverhill, Mass
Default

wow this sounds like a damn good deal depending on the # of passes and milage on the TH400... someone better jump on it
Reply
Old Jan 30, 2009 | 10:24 AM
  #5  
Raven02TA's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2002
Posts: 1,291
Likes: 2
From: Warrenton, va
Default

6 passes, less than 1k miles. this at the time when it was all bought new was a $4200 setup, the car has been sitting in the garage for 3 years since the 408 install only started never driven.



02blkws6md. i actually only really request that the t56 be installed by GB racing. if you want to do the removal of the t56 and all the parts we need for the install that would be fine. as long as your trans has reasonable mileage and shifts fine. plus also a new clutch, flywheel. lmk
Reply
Old Jan 30, 2009 | 10:26 AM
  #6  
Raven02TA's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2002
Posts: 1,291
Likes: 2
From: Warrenton, va
Default

Originally Posted by Floader
Id buy some stuff off ya if you end up parting it out.
sorry the set up either gets sold as a whole, or swapped.
Reply
Old Feb 1, 2009 | 05:08 PM
  #7  
rotacoupe95's Avatar
On The Tree
iTrader: (2)
 
Joined: Nov 2007
Posts: 135
Likes: 0
Default t56

didnt no if you got my pm but i got a fresh t56 just built from sixspeed inc all new i beleave it as a stage 3 plus some ex new center force when i put the trans in only 500 on the trans no grinds or and thing i will go to you have no problem with it would like to do something soon like this week call me 215 870 4756 name is dustin.
Reply
Old Feb 1, 2009 | 06:15 PM
  #8  
Cliff's Avatar
TECH Enthusiast
iTrader: (19)
 
Joined: Dec 2001
Posts: 623
Likes: 0
From: deam land
Default

What hp is the th400 rated to?
Reply
Old Feb 1, 2009 | 09:59 PM
  #9  
CamaroRacing12's Avatar
11 Second Club
iTrader: (5)
 
Joined: Apr 2007
Posts: 3,779
Likes: 3
From: Haverhill, Mass
Default

this is a freakin steal....wish i had a T-56
Reply
Old Feb 1, 2009 | 11:48 PM
  #10  
Raven02TA's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2002
Posts: 1,291
Likes: 2
From: Warrenton, va
Default

Originally Posted by Cliff
What hp is the th400 rated to?
built for 1,000+ HP. so says the tech we ordered it through.
Reply
Old Feb 4, 2009 | 06:32 PM
  #11  
zmanlt1's Avatar
12 Second Club
iTrader: (1)
 
Joined: Dec 2002
Posts: 34
Likes: 0
From: Mt Laurel, NJ
Default

How much would you sell the whole package for?
Reply
Old Feb 4, 2009 | 11:02 PM
  #12  
Raven02TA's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2002
Posts: 1,291
Likes: 2
From: Warrenton, va
Default

Originally Posted by zmanlt1
How much would you sell the whole package for?
trade is pending as of today to rotacoupe95, but if it falls through. the set up would be sold for 3500
Reply
Old Feb 5, 2009 | 12:33 AM
  #13  
jermzz's Avatar
TECH Fanatic
iTrader: (18)
 
Joined: Oct 2004
Posts: 1,205
Likes: 0
From: Bay area, ca.
Default

Originally Posted by Raven02TA
trade is pending as of today to rotacoupe95, but if it falls through. the set up would be sold for 3500
interested in selling just your th400 to 9" driveshaft?
Reply
Old Feb 5, 2009 | 06:30 AM
  #14  
Raven02TA's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2002
Posts: 1,291
Likes: 2
From: Warrenton, va
Default

pm sent....

trade still pending til the weekend.
Reply
Old Feb 7, 2009 | 05:07 PM
  #15  
Raven02TA's Avatar
Thread Starter
TECH Fanatic
iTrader: (11)
 
Joined: Aug 2002
Posts: 1,291
Likes: 2
From: Warrenton, va
Default

mods please lock the thread, trans conversion has been traded
Reply




All times are GMT -5. The time now is 09:22 AM.