Parting out 98 Z28 roller
I bought a 98 Z28 off a board member for the engine/trans and I'm getting rid of what's left over. What I have left is the body with the doors and rear hatch, all glass, the carpet (grey), front and rear suspension, front brakes, rear axle, coupe headliner, rear valance and bumper cover and probably other things I can't remeber. The dash and center console are already spoken for.



I also have a perfect set of 5 spoke 16" firebird wheels available with or without tires. This pic is representative of the condition of all four wheels.

Re'



I also have a perfect set of 5 spoke 16" firebird wheels available with or without tires. This pic is representative of the condition of all four wheels.

Re'
Last edited by RE AND CHERYL; Feb 3, 2009 at 08:06 PM.
How much do you want as it sits and does she have the harness?? pm me at sschevelleman08@yahoo.com and some pics would be nice.
I need a K member and all the front end components... Lower A arms, and the like. Dont need the spindles or the shocks/springs. Just the hardware.
Basically a complete K member minus shocks/springs/spindles/brakes
Please let me know.
Thanks
Basically a complete K member minus shocks/springs/spindles/brakes
Please let me know.
Thanks
Trending Topics
It is a three channel 3.42 ratio rear. I am removing the brakes/backing plates. I have not driven it to tell you if it has whine but it only has 75k on it and the gears/back lash looks good. The housing has more than normal surface rust due to being from up north. I'll take $125 pick up or you arrange shipping.
Re'
Re'
The tail panel is sold pending pick up this weekend
I don't have the switch panels
I have the fender but due to it's size shipping is insane. Probably around $80 (already checked for another member).
Re'
I don't have the switch panels
I have the fender but due to it's size shipping is insane. Probably around $80 (already checked for another member).
Re'
Have a set of sunvisors in good condition? I need a set of gray ones that the tabs are not broken or flaps dont hang down. Pm me a price shipped if you have them and are in good condition. I also need a driver side door panel and both door handle bezels. Just let me know. Thanks.


