custom comp cam and 241 heads w/brand new 918 springs

Thread Tools

Search this Thread

Feb 4, 2009 | 08:26 AM

408z28

Thread Starter

Launching!

iTrader: (44)

Joined: Aug 2007

Posts: 286

Likes: 1

From: Greensboro, North Carolina

custom comp cam and 241 heads w/brand new 918 springs

I've got a custom Comp cam 232/236 @.050 .598/.603 lift on a 114 lsa.
Used 4,8xx miles, going to something bigger.

sold

I also have a set of used 241 heads (34,xxx miles) with brand new (never run)
918 comp springs that match the cam above.

......sold to novaflash2002

Last edited by 408z28; Feb 8, 2009 at 01:31 AM.

Feb 4, 2009 | 04:11 PM

408z28

Thread Starter

Launching!

iTrader: (44)

Joined: Aug 2007

Posts: 286

Likes: 1

From: Greensboro, North Carolina

all pm's replied to...........

Feb 4, 2009 | 07:31 PM

stangbangin69

12 Second Club

iTrader: (26)

Joined: May 2005

Posts: 203

Likes: 0

From: kentucky

any advance ground in the cam?

Feb 4, 2009 | 10:21 PM

408z28

Thread Starter

Launching!

iTrader: (44)

Joined: Aug 2007

Posts: 286

Likes: 1

From: Greensboro, North Carolina

Quote:

Originally Posted by stangbangin69

any advance ground in the cam?

No...Its strait up 114

Feb 5, 2009 | 02:15 AM

tording99Z28

10 Second Club

iTrader: (3)

Joined: Nov 2007

Posts: 1,033

Likes: 2

From: Hampton, VA

Would this cam be too large for some Ported 241's and LS6 intake?

Feb 5, 2009 | 05:22 AM

408z28

Thread Starter

Launching!

iTrader: (44)

Joined: Aug 2007

Posts: 286

Likes: 1

From: Greensboro, North Carolina

Quote:

Originally Posted by tording99Z28

Would this cam be too large for some Ported 241's and LS6 intake?

Not at all... the cam came out of a GTO with stock 241's and made 436 rwhp. It was very street friendly, the 114 lsa helps. Im building a 370 nitrous motor and want to go bigger, or id use it.